Abstract:New filtration materials covered with metallic oxides are good adsorbents for both cation and anion forms of pollutants. Sfax is one of the most important industrial towns in Tunisia. Its phosphate manufacture in particular is causing considerable amounts of water pollution. Therefore, there is a need to find out a new way of getting rid of this excessive phosphate from water. This work is aimed to examining the potential of three sorbent materials (synthetic iron oxide coated sand (SCS), naturally iron oxide coated sand (NCS) and iron oxide coated crushed brick (CB)) for removing phosphate ions from aqueous solutions. According to our literature survey CB was not used as adsorbent previously. Phosphate ions are used here as species model for the elimination of other similar pollutants (arsenates, antimonates). Optical microscope and scanning electron microscope (SEM) analyses were used to investigate the surface properties and morphology of the coated sorbents. Infra-red spectroscopy and X-ray diffraction techniques were also used to characterize the sorbent structures. Results showed that iron coated crushed brick possess more micro pores and a higher surface area owing to its clay nature. The comparative sorption of PO4(3-) from aqueous solutions by SCS, CB and NCS was investigated by batch experiments. The estimated optimum pH of phosphate ion retention for the considered sorbents was 5. The equilibrium data were analysed using the Langmuir and Freundlich isotherms. The sorption capacities of PO(4)3- at pH 5 were 1.5 mg/g for SCS, 1.8 mg/g for CB and 0.88 mg/g for NCS. The effect of temperature on sorption phenomenon was also investigated. The results indicated that adsorption is an endothermic process for phosphate ions removal. This study demonstrates that all the considered sorbents can be used as an alternative emerging technology for water treatment without any side effect or treatment process alteration.

Removal of Phosphate from Aqueous Solution Using Iron-Oxide-Coated Sand Filter Media: Batch Studies

Removal of Arsenic and Phosphate from Aqueous Solution by Metal (Hydr-)Oxide Coated Sand

Phosphorus removal from aqueous solution using iron coated natural and engineered sorbents

Phosphate Removal from Aqueous Solution Using Iron Oxides: Adsorption, Desorption and Regeneration Characteristics.

Adsorptive Removal of Phosphorus from Aqueous Solution Using Sponge Iron and Zeolite.

Iron-loaded magnetic alginate-chitosan double-gel interpenetrated porous beads for phosphate removal from water: Preparation, adsorption behavior and pH stability

Equilibrium and Kinetics Studies of Adsorption Phosphate on Raw and Novel Lithium Silica Fume Based Adsorbent

Study of Removing Organic Matter in Water by Sand Coated with Iron Aluminum

A Study on the Performance of Modified Filter Media Using Iron-Oxide-Coated Sand for Fluoride Removal

Effective Removal Of Phosphate From Aqueous By Graphene Oxide Decorated With : Kinetic, Isotherm, Thermodynamic And Mechanism Study

Hydrous iron oxide modified diatomite as an active filtration medium for phosphate capture.

Adsorptive removal of phosphate from aqueous solution using waste iron sludge

Preparation of FeOOH Supported by Melamine Sponge and Its Application for Efficient Phosphate Removal

Adsorption of Cr(Ⅵ) on Iron Oxide Coated Sand

Effect of phosphate concentration, anions, heavy metals, and organic matter on phosphate adsorption from wastewater using anodized iron oxide nanoflakes

Study on Efficiency of Freshly Hydrated Iron Oxide for Phosphate Removal from Water

Phosphate Removal from Agricultural Drainage Water Using an Iron Oxyhydroxide Filter Material

Removal of Phosphate from Water by a Fe–Mn Binary Oxide Adsorbent

Phosphate removal from aqueous solutions by adsorption using ferric sludge

Removal of Phosphate by Fe-coordinated Amino-Functionalized 3D Mesoporous Silicates Hybrid Materials

Synthesis of hydrated ferric oxide on cation exchange resin for phosphate and hardness removal in water