Abstract:A New Approach to Synthesis Micrometer-sized Porous Silicon Anode for Lithium Ion batteries Haiping Jia, Xiaolin Li, and Ji-Guang Zhang Pacific Northwest National Laboratory, Richland, WA, United States. With the increasing demand on high energy Li-ion batteries (LIBs) for electric vehicles and other large scale energy storage applications, silicon (Si) based composite material has been regarded as one of the most promising candidate to replace the state-of-the-art graphite anodes and can further boost the specific energy of LIBs to be more than 300 Wh/kg. Silicon has the highest practical capacity of 3,579 mAh g-1 and a relatively low lithiation potential of 0.2 V vs. Li/Li+. However, fast capacity fade still largely limits the practical application of Si based anode. A large volume change during lithiation and delithiation processes lead to pulverization and subsequent loss of electrical contact, continuous consumption of electrolyte, repeated breaking/formation of the solid electrolyte interphase (SEI) and an increase in the overall resistance. There has been significant effort to understand and mitigate the capacity fade in Si-based anodes exploiting nanostructured electrodes, surface coatings, additives and novel binders. These advances have paved the way for practical application of Si-based anodes for Li-ion battery applications. Although significant progress has been made, most nanostructured Si materials have to be prepared by high-cost processes (such as chemical vapor deposition) that are difficult to scale up. Therefore, there is an increasing need to prepare Si microparticles (SiMP) with high conductivity and stable structures. In this work, we developed a low-cost and scalable synthesis processes to make desired micronmeter scale SiO2/MWNT spheres. The highly spherical SiO2/MWNT macrobeads ranging from 500 nm to 10 µm in diameter were employed as template and silicon precursor (Figure 1a, b). The as-prepared material basically retains the original morphology of template and demonstrates unique hierarchical structure (Figure 1c, d). The fine primary silicon particles can shorten the Li+ transport route, and avoid the pulverization of SiMP. The obtained silicon composite delivers a reversible capacity of 1290 mAh g-1 at 1C and 87% capacity can be retained after 300 cycles. We attribute this promising cycling stability to the well-designed hierarchical structure, which provides: 1) enough void space to accommodate the volume change so that the swelling of the composite can be minimized; 2) good mechanical structure and electronic conductivity from the MWNT matrix. More details on the synthesis process and electrochemical performance of SiMP will be reported in this report. Figure 1. (a, b) SEM images of microsphere SiO2/MWNT; (c, d) SEM images of the obtained Si/MWNT. Figure 1

Surface Modification of Silicon Nanoparticles by an "Ink" Layer for Advanced Lithium Ion Batteries.

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Lithium-Ion Battery Silicon Anodes: Surface Engineering with Novel Additives for Enhanced Ion and Electron Transport

Surface Modification of Micro-Silicon Anode for High-performance Lithium-Ion Batteries

Microsized Silicon/Carbon Composite Anodes through In Situ Polymerization of Phenolic Resin onto Silicon Microparticles for High-Performance Lithium-Ion Batteries

A New Approach to Synthesis Micrometer-Sized Porous Silicon Anode for Lithium Ion Batteries

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

Well-Dispersed Bi nanoparticles for promoting the lithium storage performance of Si Anode: Effect of the bridging Bi nanoparticles

Boron-Silicon Alloy Nanoparticles as a Promising New Material in Lithium-Ion Battery Anodes

Tunable Synthesis of Yolk-Shell Porous Silicon@Carbon for Optimizing Si/C-Based Anode of Lithium-Ion Batteries.

An in situ thermal cross-linking binder for silicon-based lithium ion battery

Multipath Conduction and Large Capacity Silicon-Based Anodes for High Stabilizing Lithium-Ion Batteries

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries.

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

Boosting the anode performance of the porous Si coated with polydopamine and cross-linked with sodium alginate

Boron-Doped Spherical Hollow-Porous Silicon Local Lattice Expansion toward a High-Performance Lithium-Ion-Battery Anode.

Improved Silicon/Graphite Composite Anode for High-Energy Li-Ion Battery

Monodisperse Porous Silicon Spheres as Anode Materials for Lithium Ion Batteries

Surface-Bound Silicon Nanoparticles with a Planar-Oriented N-Type Polymer for Cycle-Stable Li-Ion Battery Anode

Silicon @ Nitrogen-Doped Porous Carbon Fiber Composite Anodes Synthesized by an In-Situ Reaction Collection Strategy for High-Performance Lithium-Ion Batteries