Enhanced Field-Emission Properties of Buckled Α-Borophene by Means of Li Decoration: a First-Principles Investigation

Bing Zheng,Liang Qiao,Hai-tao Yu,Qi-yue Wang,Ying Xie,Chao-qun Qu

DOI: https://doi.org/10.1039/c8cp01048j

2018-01-01

Abstract:Li decoration and external electric field decrease the potential barrier to electron emission and increase field emission current of buckled α-borophene.

What problem does this paper attempt to address?

Field Emission Properties of Boron Nanostructures

Fei Liu,Haibo Gan,Luxi Peng,Yun Yang,Jun Chen,Shaozhi Deng,Ningsheng Xu

DOI: https://doi.org/10.1109/ivnc.2015.7225570

2015-01-01

Abstract:Boron nanostructures (nanowires and nanotubes) have been thought as ideal nanomaterials for building optoelectronic nanodevices because of their high conductivity, large elastic modulus and high melting-point. In our studies, it is found that boron nanostructures have a low turn-on field and high emission uniformity. Moreover, boron nanostructures can endure a high emission current, which suggests that they may have potential application in field emission area.
Enhanced Electron Field Emission in B-doped Carbon Nanotubes

J.-C. Charlier,M. Terrones,M. Baxendale,V. Meunier,T. Zacharia,N. L. Rupesinghe,W. K. Hsu,N. Grobert,H. Terrones,G. A. J. Amaratunga

DOI: https://doi.org/10.1021/nl0256457

IF: 10.8

2002-01-01

Nano Letters

Abstract:Field emission properties of B-doped carbon nanotubes are investigated from both theoretical and experimental standpoints. Using tight-binding and ab initio calculations, it is observed that B-saturating tip edges of carbon nanotubes induce the presence of large peaks within the local density of states (LDOS) located in an energy region close to the Fermi level (Ef). These localized states suggest a field emission enhancement for the B-doped tubes. In addition, ab initio theoretical results indicate that the work function for B-doped tubes is 1.7 eV lower when compared to pure carbon-terminated nanotubes. Experimentally, it is found that B-doped tubes, which are produced by arc discharge techniques and contain B mainly at the tips, exhibit stable electron field emission at lower turn-on voltages (1.4 V/mum) when compared to pure single- and multiwalled carbon nanotubes (2.8 and 3.0 V/mum, respectively) measured under the same conditions. We strongly believe our results will bring new insights in the fabrication of stable field emission sources.
Mechanical and Electrical Properties of Borophene and Its Band Structure Modulation Via Strain and Electric Fields: a First-Principles Study

Xiaoyuan Wang,Rongyao Wu,Tao Xu,Yang Gao

DOI: https://doi.org/10.1088/2053-1591/ac04ec

IF: 2.025

2021-01-01

Materials Research Express

Abstract:The basic electronic and mechanical properties of 2-Pmmn borophene and their strain and electric field-dependence are studied by the first-principles calculations. The Young’s moduli are 236 and 89 GPa in the armchair and zigzag directions, respectively, indicating that the borophene has giant mechanical anisotropy. We also find that the borophene presents anisotropic electronic properties. The borophene is electroconductive in armchair direction but has a bandgap in the zigzag direction. To modulate the band structure, we applied strain and electric fields on borophene, and find that, the resistance of borophene decreases with the increase of applied strain, while the applied electric field has almost no effect on its band structure. The enhanced conductivity of borophene upon applied strain is ascribed to the expansion of the buckled structure through the analysis of the charge density of the strained borophene.
Highly Effective Work Function Reduction of α‐Borophene via Caesium Decoration: A First‐Principles Investigation

Bing Zheng,Ying Xie,Ying‐yi Deng,Zhao‐qi Wang,Yuan‐qing Lou,Yin‐yin Qian,Jing He,Hai‐tao Yu

DOI: https://doi.org/10.1002/adts.201900249

2020-03-11

Advanced Theory and Simulations

Abstract:AbstractBorophene‐based nanocomposite is envisioned as a highly promising electrode material for nanoscale electronic devices such as light‐emitting diodes, organic solar cells, and field emitters. Therefore, engineering the work function of borophene to an optimal value is crucial for maximizing both conversion efficiency and device performance. A first‐principles density functional theory is employed to investigate the effects of Cs decoration on the structure, electronic properties, and work function of α‐borophene. The results indicate that Cs decoration effectively reduces the work function of α‐borophene (4.16 eV) to 3.05–0.11 eV at varying Cs concentrations, superior to those obtained in previous studies for Li (or other metal atom) decoration. Notably, work functions of all (but one) optimized Cs‐decorated α‐borophene configurations are lower than those of the commonly used electrode materials, Mg and Ca. Additionally, this study comprehensively investigates factors contributing to the work function reduction of Cs‐decorated α‐borophene relative to α‐borophene. Further, the results indicate that Cs decoration is a simple and effective method for decreasing the work function. Therefore, Cs‐decorated α‐borophene nanomaterials can be potentially utilized as cathode materials in electronic devices due to their metallic character and extremely low work functions.

multidisciplinary sciences
Li Storage Performance for the Composite Structure Of Graphene and Boron Fullerene

zhou xiang,chen ji,gu lin,miao ling

DOI: https://doi.org/10.1088/0256-307X/32/2/026102

2015-01-01

Chinese Physics Letters

Abstract:We study the stability and performance of Li absorption on the composite structure (B80C72) of boron fullerene and graphene by first-principles calculations. Our results show that the Li storage capacity of the composite structure is estimated to be at least Li54B80C72, which is steady with improved dispersibility and electronic conductivity. The composite structure could have the potential application as the anode material of Li-ion batteries with high Li storage capacity and great mechanical property.
Ground state properties and spectral properties of borospherene B40 under different external electric fields

Li Shi-Xiong,Zhang Zheng-Ping,Long Zheng-Wen,Qin Shui-Jie,,,,

DOI: https://doi.org/10.7498/aps.66.103102

IF: 0.906

2017-01-01

Acta Physica Sinica

Abstract:The recent discovery of borospherene B40 marks the onset of a new class of all-boron fullerenes. External electric field can influence the structure and property of molecule. It is necessary to understand the electrostatic field effect in the borospherene B40. In this work, density functional theory method at the PBE0 level with the 6-31G* basis set is used to investigate the ground state structures, mulliken atomic charges, the highest occupied molecular orbital (HOMO) energy levels, the lowest unoccupied molecular orbital (LUMO) energy levels, energy gaps, electric dipole moments, infrared spectra and Raman spectra of borospherene B40 under the external electric field within the range of values F=0-0.06 a.u.. The electronic spectra (the first 18 excited states contain excited energies, excited wavelengths and oscillator strengths) of borospherene B40 are calculated by the time-dependent density functional theory method (TD-PBE0) with the 6-31G* basis set under the same external electric field. The results show that borospherene B40 can be elongated in the direction of electric field and B40 molecule is polarized under the external electric field. Meanwhile, the addition of external electric field results in lower symmetry (C2v), however, electronic state of borospherene B40 is not changed under the external electric field. Moreover, the calculated results show that the electric dipole moment is proved to be increasing with the increase of the external field intensity, but the total energy and energy gap are proved to decrease with the increase of external field intensity. The addition of external electric field can modify the infrared and Raman spectra, such as the shift of vibrational frequency and the strengthening of infrared and Raman peaks. Furthermore, the calculated results indicate that the external electric field has a significant effect on the electronic spectrum of borospherene B40. The increase of the electric field intensity can lead to the redshift of electronic spectrum. With the change of the electric field intensity, the strongest excited state (with the biggest oscillator strength) can become very weak (with the small oscillator strength) or optically inactive (with the oscillator strength of zero). Meanwhile, the weak excited state can become the strongest excited state by the external field. The ground state properties and spectral properties of borospherene B40 can be modified by the external electric field. Our findings can provide theoretical guidance for the application of borospherene B40 in the future.

physics, multidisciplinary
Ultra-Low Threshold Field Emission from Amorphous Bn Nanofilms

Ya-Nan Li,Ru-Zhi Wang,Chao-Hua Su,Zhen Shen,Yue-Fei Zhang,Hui Yan

DOI: https://doi.org/10.1016/j.jallcom.2017.02.187

IF: 6.2

2017-01-01

Journal of Alloys and Compounds

Abstract:In this work, Field emission (FE) properties of mixed phase amorphous boron nitride (BN) nanofilms prepared by plasma enhanced chemical vapor deposition (PECVD) were thoroughly investigated. The results showed that, for mixed amorphous BN nanofilms with a little cubic boron nitride (c-BN) and wurtzite boron nitride (w-BN) nanocrystalline, the turn on field of the nanofilms is as low as similar to 0.5 V/mu m and the FE current density can reach similar to 12 mA/cm(2) when the electrical field is only 0.75 V/mu m. However, for primary cubic phase nanocrystalline BN films, the FE current density is only 500 mu A/cm(2); at as high as about 2.5 V/mu m. Moreover, the field emission mechanism of the phase amorphous BN nanofilms was further discussed. Field emission enhancement for mixed phase amorphous BN may be originated from electron step-transport in different energy states and multi-channel electron transport in nanocrystalline interface. (C) 2017 Elsevier B. V. All rights reserved.
Effect of Li Adsorption on Work Function Modulation of Bilayer -Borophene: A Theoretical Study

Deng Yingyi,Qian Yinyin,Xie Ying,Zhang Lei,Zheng Bing,Lou Yuanqing,Yu Haitao

DOI: https://doi.org/10.6023/a19120455

2020-01-01

Acta Chimica Sinica

Abstract:As a new member of the two-dimensional nanomaterial family, borophene is regarded as a potential material platform for nanoscale electronic devices. Especially, borophene-based electrodes have potential application values in light-emitting diodes, manic light-emitting diodes, manic solar cells and field emitters. Therefore, the work function modulation (to an optimal value) of borophene is highly important to maximize the energy conversion efficiency and performance of the device. Based on the first-principles density functional theory, the effects of Li adsorption on the structure, electronic properties and work function of double-layer alpha-borophene (DBBP) are studied. The calculation results show that Li adsorption can effectively adjust the work function of DBBP from 4.65 eV to 1.96 similar to 4.46 eV with different Li contents. This engineering range is superior to what are reported in the literatures for Li-adsorbed monolayer BBP (modified from 4.16 eV to 2.31 similar to 3.67 eV), and double-layer graphene with intercalated Li (3.4 similar to 3.9 eV) and K (3.3 similar to 3.8 eV). The work functions of Li-2(D)/DBBP (3.73 eV) and Li-3(D)/DBBP (2.91 eV) arc close to the commonly used electrode materials Mg and Ca, respectively, while the work function of Li-4(D())/DBBP is even lower than Ca. In addition, the factors that affect the work function reduction of Li-n/DBBP relative to DBBP, such as configuration, substrate deformation, binding energy, electron transfer, charge rearrangement, electrostatic potential, vacuum and Fermi level, are systematically studied. The results demonstrate that the decrease in the Li/DBBP work function is mainly due to the change in Fermi level, while the change in vacuum level only plays a minor role. Apart from that, the deformation of the substrate does not have a positive effect on the reduction of the Li-n/DBBP work function. but the electron transfer from the adsorbed atoms to the matrix (charge redistribution caused by chemical effects) is the inherent reason for the decrease in the Li-n/DBBP work function. This study shows that Li adsorption is a simple and effective method to reduce the work function of DBBP. Due to its metallic character and extremely low work function. Li-adsorbed DBBP nanomaterials can be utilized as cathode materials in electronic devices.
Probing Field Emission from Boron Carbide Nanowires

Tian Ji-Fa,Bao Li-Hong,Wang Xing-Jun,Hui Chao,Liu Fei,Li Chen,Shen Cheng-Min,Wang Zong-Li,Gu Chang-Zhi,Gao Hong-Jun

DOI: https://doi.org/10.1088/0256-307x/25/9/099

2008-01-01

Chinese Physics Letters

Abstract:High density boron carbide nanowires are grown by an improved carbon thermal reduction technique. Transmission electron microscopy and electron energy lose spectroscopy of the sample show that the synthesized nanowires are B4 C with good crystallization. The field emission measurement for an individual boron nanowire is performed by using a Pt tip installed in the focused ion beam system. A field emission current with enhancement factor of 106 is observed and the evolution process during emission is also carefully studied. Furthermore, a two-step field emission with stable emission current density is found from the high-density nanowire film. Our results together suggest that boron carbide nanowires are promising candidates for electron emission nanodevices.
Enhancing field-effect mobility and maintaining solid-state emission by incorporating 2,6-diphenyl substitution to 9,10-bis(phenylethynyl)anthracene

Jie Liu,Jinyu Liu,Zichao Zhang,Chunhui Xu,Qingyuan Li,Ke Zhou,Huanli Dong,Xiaotao Zhang,Wenping Hu

DOI: https://doi.org/10.1039/c7tc00372b

IF: 6.4

2017-01-01

Journal of Materials Chemistry C

Abstract:The development of optical and electrical organic semiconductors is crucial for the construction of integrated optoelectronic devices. Herein, a new anthracene derivative, 2,6-diphenyl-9,10-bis(phenylethynyl) anthracene (DP-BPEA), was designed and synthesized by enlarging the pi-conjugation of 9,10-bis(phenylethynyl) anthracene (BPEA) via 2,6-diphenyl substitution. Compared with the parent BPEA molecule, an improved field-effect mobility of 1.37 cm(2) V-1 s(-1) with a comparable solid fluorescence efficiency of 32% is obtained for DP-BPEA, suggesting its potential applications in integrated optoelectronic devices.
Enhanced electron field emission of two-dimensional boron-doped ZnO nanoflakes on nanocrystal diamond films

Hongjun Hei,Yanan Su,Yanyan Shen,Jiaqi Zhi,Jie Gao,Ke Zheng,Bing Zhou,Yanxia Wu,Shengwang Yu

DOI: https://doi.org/10.1016/j.diamond.2023.109823

IF: 3.806

2023-05-01

Diamond and Related Materials

Abstract:B doping into ZnO to improve the electrical property is one of the hot topics to push forward its application in field-emission devices. Besides, compared with the conventional Si substrates, nanocrystalline diamond (NCD) films have been considered as more promising substrates for use in extreme environments, due to their wide band gap, high thermal conductivity breakdown voltage, and large Baliga's figures of merit (~43,938). In this work, boron-doped ZnO (BZO) nanoflakes have been grown on NCD films by hydrothermal method. The morphologies, crystallographic structure, and electrical conductivity of the BZO nanoflakes on NCD films with different growth time have been investigated. Besides, the electron field emission (EFE) properties of the specimens were compared with those on the Si substrates. The results illustrate that the ZnO growth along the c-axis direction was inhibited by B doping and formed two-dimensional nanoflakes. New flaky assembly units would be generated and grown by the surface adsorption of HMTA molecules and Zn2+ ions with prolonged growth time, causing the transformation from single-layer nanoflakes to multi-layer ones. Meanwhile, the formation of oxygen vacancies was effectively inhibited by B doping, increasing the ZnO crystal quality. The BZO nanoflakes grown for 8 h possessed multilayer structure and the highest crystal quality which provided more efficient electron emission sites, leading to better EFE properties than that of other specimens. In addition, the NCD-based emitters obtained a longer lifetime and better stability due to their higher electrical conductivity and steady electron transport, compared with Si-based emitters. These can prove that the BZO nanoflakes/NCD films own notable EFE performances, which can make them achieve promising applications for different field-emission devices.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Modulation of Electronic Properties of Hexagonal Boron Nitride Bilayers by an Electric Field: A First Principles Study

Zailin Yang,Jun Ni

DOI: https://doi.org/10.1063/1.3373571

IF: 2.877

2010-01-01

Journal of Applied Physics

Abstract:The electronic structures of hexagonal boron nitride (BN) bilayers are studied by first principles calculations. The stabilities of BN bilayers with various stackings are determined. We find that an external electric field could significantly modulate the energy gaps of BN bilayers. By a relatively small adjustment of interlayer distance near the equilibrium position, we show that the direct band gaps can be obtained in a wide energy range when an external electric field is applied. These results suggest potential applications of BN bilayers in light emitting devices.
Theoretical design of C 3 N/Borophene heterostructure as high-performance anode materials for Li-ion batteries

Manqi You,Mengyang Zhang,Gencai Guo,Siwei Luo,Jianxin Zhong

DOI: https://doi.org/10.1016/j.electacta.2023.142799

IF: 6.6

2023-07-05

Electrochimica Acta

Abstract:C 3 N has been widely studied as an anode material for lithium-ion batteries due to its excellent mechanical properties and high lithium storage capacity. However, the low mobility and weak adsorption capacity of Li-ion limit its further development. Coincidentally, borophene has strong Li binding strength and fast Li diffusion ability which can make up for the deficiency of C 3 N. Therefore, a C 3 N/Borophene heterostructure was constructed, which is expected to improve the deficiency of C 3 N. The calculated results show that C 3 N/Borophene is metallic and has ultra-high stiffness (Young's modulus = 757.93 N/m (01) and 543.25 N/m (10)), which can improve the electronic conductivity and deformation resistance of the anode material during battery operation. The Li adsorption capacity of C 3 N/Borophene (0.85 eV–2.92 eV) improved significantly for that of C 3 N (0.35 eV–0.53 eV). In addition, the lithium storage capacity of C 3 N/Borophene can reach 1086.27 mAh/g at maximum. Surprisingly, Li has a very low energy barrier (0.006 eV–0.01 eV) in the grooves of Borophene's outer surface, ensuring high Li mobility. The good electronic and ionic conductivity, excellent mechanical properties, strong Li binding ability, and high capacity demonstrate C 3 N/Borophene is a potential anode material for Li-ion batteries.

electrochemistry
Enhanced Field Emission Performance of Lanthanum Hexaboride Coated on Graphene Film

Xiaoju Wang,Jiang Deng,Liyangxia Lei,Kangcheng Qi,Guichuan Cao,Linhong Zha

DOI: https://doi.org/10.1088/2053-1591/aae0c6

IF: 2.025

2018-01-01

Materials Research Express

Abstract:Lanthanum hexaboride (LaB6) is coated on electrophoretically deposited-graphite film by electron beam evaporation method. Surface morphology, Raman spectra and field emission properties are discussed by varying LaB6 coating thickness. It is demonstrated that this film cathode always shows much better field emission performance than pristine graphite cathode. Especially when LaB6 film thickness is 90 nm, the emission current increases from 153 μA to 850 μA with the applied electric field of 6.7 V μm−1, and the turn-on field decreases from 2.3 V μm−1 to 1.0 V μm−1. The results suggest that the graphene-based composite is an excellent field emission cathode, especially suitable for vacuum devices such as field emission display.
First-principles Study on the Enhancement of Lithium Storage Capacity in Boron Doped Graphene

Xianlong Wang,Zhi Zeng,Hyojun Ahn,Guoxiu Wang

DOI: https://doi.org/10.1063/1.3259650

IF: 4

2009-01-01

Applied Physics Letters

Abstract:The adsorption of Li ions on boron doped graphene was investigated using a first-principles method. Our results show that, as boron doping turns graphene into an electron-deficient system, more Li ions can be captured around boron doped centers than in pristine graphene. One boron atom doped into graphene (6C ring unit) can adsorb six Li ions, which indicates that boron doped graphene is an efficient Li-ion storage material for lithium batteries. Further investigations show that, under limited conditions, boron doped graphene (BC5) can form Li6BC5 compound after Li-ion adsorption, corresponding to a lithium storage capacity of 2271 mAh/g which is six times that of graphite.
Investigation on electrochemical performance of striped, β12 and χ3 Borophene as anode materials for lithium-ion batteries

Sina Karimzadeh,Babak Safaei,Tien-Chien Jen

DOI: https://doi.org/10.1016/j.jmgm.2023.108423

Abstract:By developing next-generation lithium-ion batteries (LIBS), demand for exploring novel anode materials with exclusive electrochemical features and ultra-high capacity is increasing. In the current research, first-principles theory, and density functional theory (DFT) calculations were conducted to extensively investigate and compare the capability of three different borophene nanolayers, including striped, β12, and χ3 borophene, as a novel candidate for anode electrode in LIBs. We first predicted the most preferential Li atom adsorption sites on the three borophene structures. The predicted average formation energies for striped, β12, and χ3 borophene were obtained 3.123, 3.184, and 3.216 eV, respectively. The positive value of formation energy exhibits the sufficient stability of the structures. Moreover, the negative adsorption energy proved that Li atom insertion on all borophene monolayers is thermodynamically favorable. In order to simulate the lithiation process, we gradually increased the concentration of Li atoms. We found that the fully lithiated striped, β12 and χ3 borophenes could provide ultra-high specific capacities of 1700, 1983, and 1859 mAh/g, respectively. Structural analysis proved that the surface area expansion rate of the striped borophene in a fully lithiated state was 1%, which was lower than those of β12 and χ3 borophene with 3.33% and 2.63%, respectively. The analyses of electronic properties confirmed that borophenes were inherently metallic and superior ion conductive agents, even after fully lithiated state. Ion diffusion was studied using Nudged elastic band method and the value of diffusion energy barrier ranged from 0.03 to 0.36 eV which was lower than other promising 2D anode materials. Furthermore, open-circuit voltage results demonstrated that the electronic potential of modeled borophenes was low enough to be in the acceptable range of under 1.2V. All these reports exhibited that borophene nanolayers with excellent specific capacity and superior conductivity were desired candidates for anode materials of next generation LIBs.
One Dimensional Nearly Free Electron States in Borophene

Longjuan Kong,Liren Liu,Lan Chen,Qing Zhong,Peng Cheng,Hui Li,Zhuhua Zhang,Kehui Wu

DOI: https://doi.org/10.48550/arXiv.1904.09691

2019-04-22

Abstract:Two-dimensional boron (borophene) is featured by its structural polymorphs and distinct in-plane anisotropy, opening opportunities to achieve tailored electronic properties by intermixing different phases. Here, using scanning tunneling spectroscopy combined with first-principles calculations, delocalized one-dimensional nearly free electron states (NFE) in the (2,3) or \b{eta}12 borophene sheet on the Ag(111) surface were observed. The NFE states emerge from a line defect in the borophene, manifested as a structural unit of the (2,2) or \c{hi}3 sheet, which creates an in-plane potential well that shifts the states toward the Fermi level. The NFE states are held in the 2D plane of borophene, rather than in the vacuum region as observed in other nanostructures. Furthermore the borophene can provide a rare prototype to further study novel NFE behaviors, which may have potential applications on transport or field emission nanodevices based on boron.

Materials Science
Li-intercalation chemistry of few-layer borophene with ultrahigh capacity and fast kinetics

Linlin Guo,Huili Wang,Zhonghan Wu,Xinru Yang,Ruoxuan Ma,Yanfang Hu,Geng Li,Dongjie Shi,Wei Xie,Wei Zhang,Fujun Lan,Limin Zhou,Kai Zhang

DOI: https://doi.org/10.1016/j.cej.2023.145017

IF: 15.1

2023-08-06

Chemical Engineering Journal

Abstract:Two-dimensional borophene nanosheets (2D BNSs) have been theoretically predicted to be an ideal lithium-storage material owing to their high theoretical capacity and low Li-ion diffusion energy barrier. However, the lithium-storage capability and mechanism of 2D BNSs have not yet been reported until now. Herein, ultrathin 2D BNSs (<2 nm) were successfully fabricated by sonication-assisted liquid exfoliation, and further explored as a Li-storage host. The ultrathin BNSs delivered an ultrahigh capacity of 782.9 mAh/g over 500 cycles at 167 mA/g. The Li-storage mechanism of BNSs was revealed by in-situ X-ray diffraction and the results showed that the Li + ions intercalate/deintercalate along (2 0 5) plane with the formation of interstitial compound of Li 0.48 B. The charge storage behavior of 2D BNSs was also proved to be dominated by a pseudocapacitance-control process, which contributes to the high-rate capability. This work would accelerate the exploration of emerging 2D materials for high-energy–density lithium-ion batteries.

engineering, chemical, environmental
Enhanced Field Emission from a Carbon Nanotube Array Coated with a Hexagonal Boron Nitride Thin Film

Xiaoxia Yang,Zhenjun Li,Feng He,Mingju Liu,Bing Bai,Wei Liu,Xiaohui Qiu,Hang Zhou,Chi Li,Qing Dai

DOI: https://doi.org/10.1002/smll.201403323

IF: 13.3

2015-01-01

Small

Abstract:A high-quality field emission electron source made of a highly ordered array of carbon nanotubes (CNTs) coated with a thin film of hexagonal boron nitride (h-BN) is fabricated using a simple and scalable method. This method offers the benefit of reproducibility, as well as the simplicity, safety, and low cost inherent in using B(2)O(3) as the boron precursor. Results measured using h-BN-coated CNT arrays are compared with uncoated control arrays. The optimal thickness of the h-BN film is found to be 3 nm. As a result of the incorporation of h-BN, the turn-on field is found to decrease from 4.11 to 1.36 V μm(-1), which can be explained by the significantly lower emission barrier that is achieved due to the negative electron affinity of h-BN. Meanwhile, the total emission current is observed to increase from 1.6 to 3.7 mA, due to a mechanism that limits the self-current of any individual emitting tip. This phenomenon also leads to improved emission stability and uniformity. In addition, the lifetime of the arrays is improved as well. The h-BN-coated CNT array-based field emitters proposed in this work may open new paths for the development of future high-performance vacuum electronic devices.
First Principles Study of P-doped Borophene As Anode Materials for Lithium Ion Batteries

Hui Chen,Wei Zhang,Xian-Qiong Tang,Yan-Huai Ding,Jiu-Ren Yin,Yong Jiang,Ping Zhang,Haibao Jin

DOI: https://doi.org/10.1016/j.apsusc.2017.08.178

IF: 6.7

2017-01-01

Applied Surface Science

Abstract:In this paper, Li storage in P-doped borophene nanosheet was stimulated by Density Functional Theory (DFT). Without destroying the nanosheet structure, borophene doped with P atom possessed high binding energy of 3.42 eV. The electronic properties, binding energy, capacity and open-circuit voltage of P-doped borophene were calculated. These results demonstrated that P-doping has a positive effect on the Li storage of borophene nanosheet. Besides, the maximum adsorption number of Li atoms in P-doped borophene is 18, accompanied with an ultra-high theoretical capacity of 1732 mAh/g. (c) 2017 Elsevier B.V. All rights reserved.

Enhanced Field-Emission Properties of Buckled Α-Borophene by Means of Li Decoration: a First-Principles Investigation

Field Emission Properties of Boron Nanostructures

Enhanced Electron Field Emission in B-doped Carbon Nanotubes

Mechanical and Electrical Properties of Borophene and Its Band Structure Modulation Via Strain and Electric Fields: a First-Principles Study

Highly Effective Work Function Reduction of α‐Borophene via Caesium Decoration: A First‐Principles Investigation

Li Storage Performance for the Composite Structure Of Graphene and Boron Fullerene

Ground state properties and spectral properties of borospherene B40 under different external electric fields

Ultra-Low Threshold Field Emission from Amorphous Bn Nanofilms

Effect of Li Adsorption on Work Function Modulation of Bilayer -Borophene: A Theoretical Study

Probing Field Emission from Boron Carbide Nanowires

Enhancing field-effect mobility and maintaining solid-state emission by incorporating 2,6-diphenyl substitution to 9,10-bis(phenylethynyl)anthracene

Enhanced electron field emission of two-dimensional boron-doped ZnO nanoflakes on nanocrystal diamond films

Modulation of Electronic Properties of Hexagonal Boron Nitride Bilayers by an Electric Field: A First Principles Study

Theoretical design of C 3 N/Borophene heterostructure as high-performance anode materials for Li-ion batteries

Enhanced Field Emission Performance of Lanthanum Hexaboride Coated on Graphene Film

First-principles Study on the Enhancement of Lithium Storage Capacity in Boron Doped Graphene

Investigation on electrochemical performance of striped, β12 and χ3 Borophene as anode materials for lithium-ion batteries

One Dimensional Nearly Free Electron States in Borophene

Li-intercalation chemistry of few-layer borophene with ultrahigh capacity and fast kinetics

Enhanced Field Emission from a Carbon Nanotube Array Coated with a Hexagonal Boron Nitride Thin Film

First Principles Study of P-doped Borophene As Anode Materials for Lithium Ion Batteries