Abstract:Nanoscale mechanical resonator-based nanoelectromechanical systems have been reported with ultrahigh sensitivity, which are normally acquired from an ultravacuum environment at cryostat temperature. To facilitate their practical applications for gas sensing or bio-detection, it is critical to understand how the fluid (gas or liquid) environment will impact the resonance behaviors of the nanoresonator. This work reports a first-time comprehensive investigation on the influence of the N-2 gaseous environment on the resonance properties of carbon nanotube (CNT)-based mechanical resonator, through a combination of grand canonical Monte Carlo and large-scale molecular dynamics simulations. It is shown that the gaseous environment exerts a significant effect on the resonance properties of the CNT resonator through a dynamic desorption and readsorption process. Under the temperature of 100 K and the pressure of 1 bar, the displacement amplitude of the CNT resonator is found to experience a sharp reduction of about 82% within the first 90 ps vibration in the N-2 gaseous environment. Further, a large initial excitation is found to result in smaller adsorption and a reduced damping effect. For instance, when the excitation velocity amplitude increases from 2 to 8 angstrom/ps, the damping ratio shows more than 40% reduction. It is found that higher pressure leads to a smaller resonance frequency and enhanced damping effect, while higher temperature induces an increase in the resonance frequency but a decrease in the damping ratio. This work shows that the gaseous environment has a marked impact on the vibrational properties of nanoresonators, which should shed light on the application of mechanical nanoresonators in a fluid environment.

Diamond nanothread based resonators: ultrahigh sensitivity and low dissipation.

Single layer diamond - A new ultrathin 2D carbon nanostructure for mechanical resonator

The Best Features of Diamond Nanothread for Nanofibre Applications

Thermal Conductivity of A New Carbon Nanotube Analog: the Diamond Nanothread

Diamond Nanothread As A New Reinforcement for Nanocomposites

Size effect on transverse free vibrations of ultrafine nanothreads

Deformation Mechanisms of Diamond Nanothread-Based Nanofiber

Thermal Conductivity of Diamond Nanothread

Tuning the Resonance Properties of 2D Carbon Nanotube Networks Towards a Mechanical Resonator

How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator

Reducing Intrinsic Energy Dissipation in Diamond-on-diamond Mechanical Resonators Toward One Million Quality Factor

Single-Crystal Diamond Nanomechanical Resonators with Quality Factors exceeding one Million

Responding maintained by intermittent reinforcement: implications for the use of extinction with problem behavior in clinical settings.

Centimeter-scale nanomechanical resonators with low dissipation

The Best Features of Diamond Nanothread for Nanofiber Application

Elastic Strain Engineered Nanomechanical GaN Resonators with Thermoelastic Dissipation Dilution Up to 600 K

The morphology and temperature dependent tensile properties of diamond nanothreads

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Anomalous Thermal Conductivity Enhancement in Low Dimensional Resonant Nanostructures Due to Imperfections

Carbon nanotubes as ultra-high quality factor mechanical resonators

Ultralow Dissipation Nanomechanical Devices from Monocrystalline Silicon Carbide