Abstract:Nowadays, many studies focus on the preparation of small-diameter vascular scaffolds, but some issues still existed that need to be urgently solved, but there are still problems such as slow endothelialization and failure to keep the vessels open for a long time that need to be solved. In this paper, a composite process of preparing triple-layer vascular scaffolds with microchannel structure in the inner layer is proposed to guide cell growth and accelerate the endothelialization process. The PCL pattern was printed as the intermediate layer of the vascular scaffold by 3D printing method, and the width of the microchannel in the inner layer of the scaffold was controlled by the printing spacing. The inner and outer layers were prepared by electrospinning. Heparin is often used as an anticoagulant in vascular tissue engineering to improve the problem of thrombosis and blockage of vascular scaffold after transplantation into the body. Here, the inner layer carries heparin immobilized with silk fibroin by coaxial electrospinning, so that heparin can be released slowly. The addition of silk fibroin also improved the hydrophilicity of PCL electrospinning film by water contact angle test. The mechanical properties of vascular scaffolds with double intermediate layers (DIL) are better than those with single intermediate layers (SIL) and also better than pure electrospinning scaffolds. In vitro cell experiments showed that cells grow directionally on microchannel structures of inner layer and randomly on electrospinning film without microchannel structure. The results showed that the microchannels were more conducive to cell growth and proliferation at a diameter of 0.25 mm. The composite electrospinning films with silk fibroin and heparin facilitated cell adhesion and proliferation compared to the pure PCL films. All these results indicate that the vascular scaffolds have potential applications in clinic for vascular tissue regeneration.

A Strategy for Rapid Construction of Blood Vessel-Like Structures with Complex Cell Alignments

Fabrication of a tubular vascular scaffold with circumferential microchannels to induce oriented growth of smooth muscle cells

A Strategy for Rapid and Facile Fabrication of Controlled, Layered Blood Vessel-Like Structures

Electrospun gelatin-based biomimetic scaffold with spatially aligned and three-layer architectures for vascular tissue engineering

Fabrication Process of Triple-Layer Small-Diameter Vascular Scaffold with Microchannel Structure in the Inner Layer for Accelerated Endothelialization

Macromol. Biosci. 5/2018

Preparation of an Adipose-Derived Stem Cell/fibrin–poly(d,l-Lactic-co-glycolic Acid) Construct Based on a Rapid Prototyping Technique

Bioinspired, Artificial, Small-Diameter Vascular Grafts with Selective and Rapid Endothelialization Based on an Amniotic Membrane-Derived Hydrogel.

Rapid Fabrication of Cell-Laden Microfibers for Construction of Aligned Biomimetic Tissue

Continuous Fabrication and Assembly of Spatial Cell-Laden Fibers for a Tissue-Like Construct Via a Photolithographic-Based Microfluidic Chip.

Novel Compound-Forming Technology Using Bioprinting and Electrospinning for Patterning A 3d Scaffold Construct with Multiscale Channels

Template-assisted electrospinning and 3D printing of multilayered hierarchical vascular grafts

Technique for rapidly forming networks of microvessel-like structures

Biomimetic Vascular Grafts with Circumferentially and Axially Oriented Microporous Structures for Native Blood Vessel Regeneration

Fabrication of Multilayer Tubular Scaffolds with Aligned Nanofibers to Guide the Growth of Endothelial Cells.

Biomimic Tubulose Scaffolds with Multilayer Prepared by Electrospinning for Tissue Engineering

A versatile strategy to construct free-standing multi-furcated vessels and a complicated vascular network in heterogeneous porous scaffolds via combination of 3D printing and stimuli-responsive hydrogels

Rapid Assembling Organ Prototypes with Controllable Cell-Laden Multi-Scale Sheets

Construction of a Blood Vessel Wall with Adipose-Derived Stem Cell Sheets in Vitro

In Vitro Evaluation of Essential Mechanical Properties and Cell Behaviors of a Novel Polylactic-co-Glycolic Acid (Plga)-Based Tubular Scaffold for Small-Diameter Vascular Tissue Engineering

Rapid Construction of 3D Biomimetic Capillary Networks with Complex Morphology Using Dynamic Holographic Processing