Abstract:Three‐level hybrid surgery (HS) consisting of cervical disc arthroplasty (CDA) and anterior cervical discectomy and fusion (ACDF) has been partly used for the treatment of multi‐level cervical degenerative disc disease (CDDD). According to the different numbers and locations of CDAs and ACDFs, three‐level HS has several constructs. Few studies have concerned the von Mises stress on the prostheses, and no study had explored the von Mises stress on the vertebrae. However, the complications related to the implants and the collapsibility of the surgical vertebral bodies had been reported in multi‐level anterior cervical spine surgery. Thus, it is necessary to explore the biomechanical effects on the prostheses and vertebrae in three‐level HS. As a result, we found the stress on CDA prostheses in CDA‐ACDF‐CDA construct and the stress on ACDF prostheses in CDA‐ACDF‐CDA and ACDF‐CDA‐ACDF constructs were significantly increased. But the stress on vertebrae were lower compared with that in three‐level ACDF. Purpose Three‐level hybrid surgery (HS) consisting of cervical disc arthroplasty (CDA) and anterior cervical discectomy and fusion (ACDF) has been partly used for the treatment of multi‐level cervical degenerative disc disease (CDDD). The complications related to the implants and the collapse of the surgical vertebral bodies had been reported in multi‐level anterior cervical spine surgery. Thus, this study aimed to explore the biomechanical effects on the prostheses and vertebrae in three‐level HS. Methods A FE model of cervical spine (C0‐T1) was constructed. Five surgical models were developed. They were FAF model (ACDF‐CDA‐ACDF), AFA model (CDA‐ACDF‐CDA), FFF model (three‐level ACDF), SF model (single‐level ACDF), and SA model (single‐level CDA). A 75‐N follower load and 1.0‐N·m moment was applied to produce flexion, extension, lateral bending, and axial rotation. Results Compared with the intact model, the range of motion (ROM) of total cervical spine in FAF model decreased by 34.54%, 54.48%, 31.76%, and 27.14%, respectively, in flexion, extension, lateral bending, and axial rotation, which were lower than those in FFF model and higher than those in AFA model. The ROMs of CDA segments in FAF and AFA models were similar to the intact model and SA model. Compared with the intact model, the ROMs at C3/4 segment in FFF model increased from 5.71% to 7.85%, and increased from 5.31% to 6.81% at C7/T1 segment, following by FAF model, then the FAF model. The maximum interface pressures of the Prestige‐LP in FAF model were similar to SA model, however the corresponding values were increased in AFA model. The maximum interface pressures of the Zero‐P were increased in FAF and AFA model compared with those in SF and FFF models. The stress was mainly distributed on the screws. In AFA model, the maximum pressures of the ball and trough articulation in superior and inferior Prestige‐LP were all increased compared with those in SA and FAF model. In FFF model, the maximum pressures of the vertebrae were higher than those in other models. The stress was mainly distributed on the anterior area of the vertebral bodies. Conclusions HS seemed to be more suitable than ACDF for the surgical treatment of three‐level CDDD in consideration of the biomechanical effects, especially for the two‐level CDA and one‐level ACDF construct. But a more appropriate CDA prosthesis should be explored in the future.

Hybrid Constructs for Performing Three-level Hybrid Surgery: A Finite Element Study

A New Expanded Cage Designed for Lumbar Disc Herniation: Finite Element Analysis

The biomechanical study of a modified lumbar interbody fusion-crenel lateral interbody fusion (CLIF): a three-dimensional finite-element analysis.

The appropriate hybrid surgical strategy in three-level cervical degenerative disc disease: a finite element analysis

Biomechanical Characteristics of a Three-Level Cervical Disc Hybrid Construct: an in Vitro Investigation

Biomechanics of Hybrid Anterior Cervical Fusion and Artificial Disc Replacement in 3-Level Constructs: an in Vitro Investigation.

Incorporating strategy in hybrid surgery for continuous two-level cervical spondylosis from a biomechanical perspective

Biomechanics of Artificial Disc Replacements Adjacent to a 2-Level Fusion in 4-Level Hybrid Constructs: an in Vitro Investigation

Anterior Cervical Transpedicular Screw Fixation System in Subaxial Cervical Spine: A Finite Element Comparative Study.

Coupled motion of cervical spine in three level hybrid constructs

Coupled Motion of Cervical Spine in Three Level Hybrid Constructs.

Establishment of Finite Element Model of Anterior Cervical Transpedicular System for Reconstruction of Cervical Stabili-Ty after Subtotal Resection of Two Segments of Lower Cervical Spine

Biomechanical Effects on the Prostheses and Vertebrae of Three‐Level Hybrid Surgery: A Finite Element Study

Finite element model predicts the biomechanical performance of cervical disc replacement and fusion hybrid surgery with various geometry of ball-and-socket artificial disc

Biomechanical Analysis of Hybrid Artificial Discs or Zero-Profile Devices for Treating 1-Level Adjacent Segment Degeneration in ACDF Revision Surgery

Effects of New Cage Profiles on the Improvement in Biomechanical Performance of Multilevel Anterior Cervical Corpectomy and Fusion: A Finite Element Analysis

Prosthesis and Hybrid Strategy Consideration for Treating Two-level Cervical Disc Degeneration in Hybrid Surgery

Finite Element Analysis Of Cervical Arthroplasty Combined With Fusion Against 2-Level Fusion

Biomechanical evaluation of the novel assembled internal fixed system in C2–C3 anterior cervical discectomy and fusion: a finite element analysis

Biomechanical analysis of customized cage conforming to the endplate morphology in anterior cervical discectomy fusion: A finite element analysis

Anterior cervical hybrid constructs reduce superior adjacent segment burden compared to multilevel anterior cervical discectomy and fusion