Abstract:Bacterial community dynamics of the ANAMMOX reactor of an integrated “UASB + SHARON + ANAMMOX” system for treating piggery wastewater were investigated using the Illumina MiSeq method with samples obtained at ~ 2-week intervals during a 314-day period. With aerobic activated sludge as seeds and low content artificial wastewater (NH4+–N 50 mg/L; NO2−–N 55 mg/L) as influent for the ANAMMOX reactor, nitrogen removal was initially observed on day 38 with a removal rate 1.3 mg N L−1 day−1, and increased to 90.4 mg N L−1 day−1 on day 55 with almost complete removal of ammonia and nitrite, indicating a successful startup of the reactor. Increasing influent load stepwise to NH4+–N 272.7 mg/L/NO2−–N 300 mg/L, nitrogen removal rate increased gradually to 470 mg N L−1 day−1 on day 228, and maintained a stable level (~ 420 mg N L−1 day−1) following introduction of SHARON effluent since day 229. Correlation between microbial community dynamics and nitrogen removal capability was significant (r = 0.489, p < 0.001). Microbial community composition was determined by influent ammonia, influent nitrite, effluent nitrate and some undefined factors. Anammox bacteria, accounting for ~ 98.7% of Planctomycetes, became detectable (0.03% relative abundance) since day 38 and increased to 0.9% on day 58, well consistent with nitrogen removal performance of the reactor. Relative abundance of anammox bacteria gradually increased to 38.4% on day 140 with stepwise increased influent load; decreased to 0.4% on day 169 because of nitrite inhibition; increased to 19.24% on day 233 when the influent load was dropped; kept at ~ 9.0% with SHARON effluent used as influent and dropped to 3.3% finally. Anammox bacteria, only Candidatus Brocadia and Ca. Kuenenia detected, were the most abundant at genus level. Ca. Brocadia related taxa were enriched firstly under low load and detectable during the entire experimental period. Three main groups represented by Ca. Brocadia related OTUs were enriched or eliminated at different loads, but Ca. Kuenenia related taxa were enriched only under high load (NO2−–N > 300 mg/L), suggesting their different niches and application for different loads. These findings improve the understanding of relationships among microbial community/functional taxa, running parameters and reactor performance, and will be useful in optimizing running parameters for rapid startup and high, stable efficiency.

Nitrogen removal performance and microbial community structure in the start-up and substrate inhibition stages of an anammox reactor.

The Performance of Anammox Reactor During Start-Up: Enzymes Tell the Story

The Anammox Process at Typical Feast-Famine States: Reactor Performance, Sludge Activity and Microbial Community

Nitrogen Removal Characteristics and Comparison of the Microbial Community Structure in Different Anaerobic Ammonia Oxidation Reactors

Fast start-up of the cold-anammox process with different inoculums at low temperature (13 °C) in innovative reactor.

Characterization and Quantification of Anammox Start-Up in UASB Reactors Seeded with Conventional Activated Sludge

Microbial community dynamics in an ANAMMOX reactor for piggery wastewater treatment with startup, raising nitrogen load, and stable performance

Recovery of anammox process performance after substrate inhibition: Reactor performance, sludge morphology, and microbial community

Performance and Process Kinetics Characteristics of ANAMMOX Fixed-Bed Reactor

The start-up of anammox system inoculated with sludge overwhelmingly dominated by Candidatus Competibacter: System performance and microbial community succession

Initiation of Anammox in an Up-Flow Anaerobic Sludge Bed Reactor: Bacterial Community Structure, Nitrogen Removal Functional Genes, and Antibiotic Resistance Genes

Study on the Start-Up and Recovery Performance of an ANAMMOX Filtering Reactor after Substrate Inhibition

Characterization of a Microbial Community in an Anammox Process Using Stored Anammox Sludge

[Performance of ANAMMOX Attached Microbial Film Expanded Bed Reactor].

Startup of anaerobic ammonium oxidation process and analysis of microbial community structure

Effect of Inoculated Sludge Concentration on Start-Up of Anammox Reactor: Nitrogen Removal Performance and Metabolic Pathways

Rapid anammox startup in response to nitrogen loading variations: Reactor performance, microbial dynamics and mechanism exploration

Nitrogen Removal Performance of Anammox Biomass during the Restarting after a Long-term Abandoning and Microbial Community Analysis

[Start-Up and Recovery Performance of ANAMMOX Reactors under Long-term Starvation].

Rapid Start-Up Characteristics of Anammox under Different Inoculation Conditions

Start-up of Anammox Systems with Different Feeding Patterns: System Performance, Microbial Community and Potential Microbial Interactions