Abstract:Due to the intrinsic poor ionic/electronic conductivities of Li2S, it is a great challenge to realize high-rate all-solid-state lithium–sulfur batteries (ASSLSBs) with long cyclic performance. Herein, ultrasmall Li2S (∼15 nm) is evenly deposited on a carbon nanotube (CNT) via a facile liquid-phase method to address these issues. The unique structure of the Li2S deposited on a CNT composite cathode can improve ionic/electronic conductivities of Li2S effectively and relieve the generated internal stress/strain during cycling. Specifically, the resultant Li/75%Li2S-24%P2S5-1%P2O5/Li10GeP2S12/Li2S-53%CNT ASSLSBs show a reversible capacity of 651.4 mAh g–1 under 1.0C at 60 °C after 300 cycles and even at a much higher cathode load of 5.08 mg cm–2, a high discharge capacity of 556 mAh g–1 can still be obtained under 0.1C after 20 cycles. The outstanding electrochemical performances are also attributed to the high diffusion coefficient of Li2S-53%CNT, which is 39 times that of pristine Li2S. This work presents an efficient procedure to design cathode materials with high ionic/electronic conductivities and paves the way for the successful commercialization of high-rate ASSLSBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00511?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00511</a>.SEM images of Li2S nanoparticles; the Rietveld-refined XRD pattern of Li2S-53%CNT and SEM images of the Li2S-53%CNT nanocomposite cathode before and after ball-milling; SEM images and EDS mapping of the cross section of the interface between the cathode and the electrolyte; galvanostatic charge–discharge profiles of the Li2S-53%CNT electrode at a current density of 1.0C at 60 °C; SEM images of Li2S-53%CNT composite cathodes before and after 300 cycles; Nyquist plots for Li2S-53%CNT after the 1st and 300th cycles; current–time curves of the C/Li10GeP2S12/C and C/70%Li2S-29%P2S5-1%P2O5/C cells under DC polarization at 500 mV; activation process cycles of the Li2S-53%CNT electrode; and voltage profiles of a single step for pristine Li2S, Li2S-34%CNT, Li2S-42%CNT, and Li2S-53%CNT (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00511/suppl_file/am1c00511_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Crystalline Layered VS 2 Nanosheets for All-Solid-State Lithium Batteries with Enhanced Electrochemical Performances.

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Nickel sulfide anchored carbon nanotubes for all-solid-state lithium batteries with enhanced rate capability and cycling stability

FeS Nanosheets As Positive Electrodes for All-Solid-state Lithium Batteries

Achieving high-performance Li6.5Sb0.5Ge0.5S5I-based all-solid-state lithium batteries

Rational Design of Multi-Channel Continuous Electronic/ionic Conductive Networks for Room Temperature Vanadium Tetrasulfide-Based All-Solid-state Lithium-Sulfur Batteries

Single‐ or Poly‐Crystalline Ni‐Rich Layered Cathode, Sulfide or Halide Solid Electrolyte: Which Will be the Winners for All‐Solid‐State Batteries?

Fe3S4@Li7P3S11 nanocomposites as cathode materials for all-solid-state lithium batteries with improved energy density and low cost

Crystal Surface Engineering Induced Active Hexagonal Co2P‐V2O3 for Highly Stable Lithium–Sulfur Batteries

High Capacity and Superior Cyclic Performances of All-Solid-State Lithium Batteries Enabled by a Glass-Ceramics Solo.

Niobium sulfide nanocomposites as cathode materials for all-solid-state lithium batteries with enhanced electrochemical performance

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Ultrasmooth and Dense Lithium Deposition Toward High-Performance Lithium-Metal Batteries

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Ultrasmall Li 2 S-Carbon Nanotube Nanocomposites for High-Rate All-Solid-State Lithium–Sulfur Batteries