Abstract:Due to the steric hindrance effects in combination with stability of the tertiary benzylic alpha-methylstyryl radical, there is a dynamic equilibrium between the monomer alpha-methylstyrene (AMS) and its polymer (PAMS) when the temperature is greater than 61 degrees C (the ceiling polymerization temperature). Based on this unique feature, a novel strategy to prepare copolymers of AMS having liable bonds as potential macromolecular free radical initiators for synthesizing block and graft copolymers has been successfully developed in our laboratory. By conventional free radical polymerization, a series of AMS copolymers, including copolymers with (meth)acrylate, acrylic acid, styrene and maleic anhydride were synthesized. Typically, with the increasing of AMS fraction in monomer feed, the rate of copolymerization was significantly retarded and the molecular weight of the copolymers was reduced. However, the copolymer yield could be as high as 90% (w) with the increased addition of initiator, up to 4% (w), and the molar fraction of AMS structural unit in AMS copolymers could be up to 25% (mol%). It has been demonstrated that the copolymers containing AMS structural units are efficient free radical initiators when the temperature is greater than 80 degrees C (much better higher than 90 degrees C). These copolymers could be exploited as macroinitiator in preparing block copolymers and core-shell polymer particles by bulk, solution and emulsion polymerization processes. In addition, the experimental results demonstrated that the molecular weight of copolymer products prepared with AMS copolymers as macromolecular initiators increased steadily with the monomer conversion. Though the polymerization initiated by AMS copolymers was not a well-controlled living system yet, it showed some characteristics of living polymerization. The ESR spectrum presented direct evidence of the generation of carbon centered radicals in the products of copolymer of AMS with glycidyl methacrylate (PAG) heated with N-t-butyl-alpha-phenylnitrone at 90 degrees C in toluene. Besides initiating the polymerization of vinyl monomer to prepare diblock copolymer, the AMS copolymers offered a practical pathway to synthesize grafting polymers in melting state. For example, with the addition of PAG in the PP/Nylon melten blending, it has been demonstrated a significant in situ compatibilization effect and the formation of graft polymer of PAG and PP. Furthermore, the AMS copolymers could also be used to modify MWCNT by free radical grafting onto mechanism. Instead of competing with the other existing controlled free radical polymerization technologies, the AMS copolymer method, with competitive cost and no small molecular residues, offers an alternative tool for polymer chemists to develop block copolymers on an industrial scale for some applications, such as dispersant and compatibilizer.

Anionic Polymerization of P-(2,2'-diphenylethyl)styrene and Applications to Graft Copolymers.

One‐step Synthesis of Hyperbranched Polyethylene Macroinitiator and Its Block Copolymers with Methyl Methacrylate or Styrene Via ATRP

Synthesis and Characterization of Graft Copolymers Based on Poly( P -Phenylene Terephthalamide) Backbone and Well-Defined Polystyrene Side Chains

Synthesis and characterization of PSt-b-PDMS-b-PSt triblock copolymers

New Neutral Ni(II)- and Pd(II)-based Initiators for Polymerization of Styrene

Palladium/Benzoic Acid-Catalyzed Regio- and Stereoselective Polymerization of Internal Diynes and Diols Through C(sp(3))-H Activation

A New Strategy of Post-Polymerization Modification to Prepare Functionalized Poly(disubstituted Acetylenes)

Synthesis of hypergrafted poly[4-(N,N-diphenylamino)methylstyrene] through tandem anionic-radical polymerization of radical-inimer.

Synthesis and characterization of block copolymer with cyclic triperoxonane

Synthesis, kinetic study and characterization of C5 ‐dienes/styrene copolymers via living anionic polymerization in cyclopentyl methyl ether solvent

Synthesis and characterization of Pst‐b‐PDMS‐b‐PSt copolymers by atom transfer radical polymerization

Synthesis of polystyrene- block -polycarbonate- block - polystyrene and polycarbonate- graft -polystyrene using tandem condensation polymerization and atom transfer radical polymerization

A Novel Macroinitiator Based on the Copolymer of Α-Methylstyrene Synthesis and Its Application in Preparing Block and Graft Polymers

Continuous Process for the Synthesis of Dendrimer-Like Star Polymers by Anionic Polymerization

Radical Polymerization of Styrene Mediated by 9-(1-phenylethyl)-9-((1-phenylethyl)thio)-9 H -Thioxanthene

Synthesis Of Dendritic Polystyrenes From An Anionic Inimer

Synthesis of Graft Copolymers with “v‐shaped” and “y‐shaped” Side Chains Via Controlled Radical and Anionic Polymerizations

Synthesis and characterization of graft copolymers with poly(epichlorohydrin- co -ethylene oxide) as backbone by combination of ring-opening polymerization with living anionic polymerization

Synthesis of Block Copolymers from PDMS Macroinitiators

Graft Polymerization of 2-Hydroxyethyl Methacrylate Via ATRP with Poly(acrylonitrile-Co-p-chloromethyl Styrene) As a Macroinitiator

Synthesis of block copolymer by “living” radical polymerization of styrene with nitroxyl-functionalized poly(ethylene oxide)