Abstract:Plastic wastes are environmentally problematic and costly to treat, but they also represent a vast untapped resource for the renewable chemical and fuel production. Pyrolysis has received extensive attention in the treatment of plastic wastes because of its technical maturity. A sole polymer in the waste plastic is easy to recycle by any means of physical or chemical techniques. However, the majority of plastic in life are mixtures and they are hard to separate, which make pyrolysis of plastic complicated compared with pure plastic because of its difference in physical/chemical properties. This work focuses on the synergistic effect and its impact on chlorine removal from the pyrolysis of chlorinated plastic mixtures. The pyrolysis behavior of plastic mixtures was investigated in terms of thermogravimetric analysis, and the corresponding kinetics were analyzed according to the distributed activation energy model (DAEM). The results show that the synergistic effect existed in the pyrolysis of a plastic mixture of LLDPE, PP, and PVC, and the DAEM could well predict the kinetics behavior. The decomposition of LLDPE/PP mixtures occurred earlier than that of calculated ones. However, the synergistic effect weakened with the increase of LLDPE in the mixtures. As for the chlorine removal, the LLDPE and PP hindered the chlorine removal from PVC during the plastic mixture pyrolysis. A noticeable negative effect on dechlorination was observed after the introduction of LLDPE or PP. Besides, the chlorine-releasing temperature became higher during the pyrolysis of plastic mixtures ([LLDPE/PVC (1:1), PP/PVC (1:1), and LLDPE/PP/PVC (1:1:1)]. These results imply that the treatment of chlorinated plastic wastes was more difficult than that of PVC in thermal conversion. In other words, more attention should be paid to both the high-temperature chlorine corrosion and high-efficient chlorine removal in practical. These data are helpful for the treatment and thermal utilization of the yearly increased plastic wastes.

Mechanochemical Pre-Treatment for Viable Recycling of Plastic Waste Containing Haloorganics

Mechanochemical Dehalogenation of Brominated Flame Retardants and Preliminary Application for Recycling BFR-containing Plastic Waste

Waste-to-energy: Dehalogenation of plastic-containing wastes

Mechanochemical Treatment of Waste Poly (Vinyl Chloride) for Alcohol Halogenation by Ball Milling and Triboelectric Material

Photothermal Upcycling of Waste Polyvinyl Chloride Plastics

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Wet-mechanical processing of a plastic-rich two-dimensional-fraction from mixed wastes for chemical recycling

Chemical recycling of brominated flame retarded plastics from e-waste for clean fuels production: A review

Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): A review

Surface-Activated Mechano-Catalysis for Ambient Conversion of Plastic Waste

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Mechanochemical Conversion of Brominated POPs into Useful Oxybromides: a Greener Approach

Mechanochemistry: An Efficient Way to Recycle Thermoset Polyurethanes

Chemical Recycling of Mixed Polyolefin Post-Consumer Plastic Waste Sorting Residues (MPO323)—Auto-Catalytic Reforming and Decontamination with Pyrolysis Char as an Active Material

Sustainable Management of the Plastic-Rich Fraction of WEEE by Utilization as a Reducing Agent in Metallurgical Processes

Synergistic Effect and Chlorine-Release Behaviors During Co-pyrolysis of LLDPE, PP, and PVC

Development of a catalytic dehalogenation (Cl, Br) process for municipal waste plastic-derived oil

An Overview of the Non-Energetic Valorization Possibilities of Plastic Waste via Thermochemical Processes

Chemical recycling of polyolefins: a closed-loop cycle of waste to olefins

Debromination of novel brominated flame retardants using Zn-based additives: A viable thermochemical approach in the mitigation of toxic effects during e-waste recycling

Chemical Recycling of Mixed Plastics in Electronic Waste Using Solvent-Based Processing