Abstract:Structural colors, resulting from the interaction of light with nanostructured materials rather than pigments, present a promising avenue for diverse applications ranging from ink-free printing to optical anti-counterfeiting. Achieving structural colors with high purity and brightness over large areas and at low costs is beneficial for many practical applications, but still remains a challenge for current designs. Here, we introduce a novel approach to realizing large-scale structural colors in layered thin film structures that are characterized by both high brightness and purity. Unlike conventional designs relying on single Fabry–Pérot cavity resonance, our method leverages coupled resonance between adjacent cavities to achieve sharp and intense transmission peaks with significantly suppressed sideband intensity. We demonstrate this approach by designing and experimentally validating transmission-type red, green, and blue colors using an Ag/SiO 2 /Ag/SiO 2 /Ag configuration on fused silica substrate. The measured spectra exhibit narrow resonant linewidths (full width at half maximum ∼60 nm), high peak efficiencies (>40 %), and well-suppressed sideband intensities (∼0 %). In addition, the generated color can be easily tuned by adjusting the thickness of SiO 2 layer, and the associated color gamut coverage shows a wider range than many existing standards. Moreover, the proposed design method is versatile and compatible with various choices of dielectric and metallic layers. For instance, we demonstrate the production of angle-robust structural colors by utilizing high-index Ta 2 O 5 as the dielectric layer. Finally, we showcase a series of printed color images based on the proposed structures. The coupled-cavity-resonance architecture presented here successfully mitigates the trade-off between color brightness and purity in conventional layered thin film structures and provides a novel and cost-effective route towards the realization of large-scale and high-performance structural colors.

Structural Color Analysis of the Photoresist Grating Influenced by the Light Source and Its Parameters

Design of incident angle-independent color filter based on subwavelength two-dimensional gratings

Tunable, Omnidirectional Structural Color on Reflection Based on Metal-Siox-Metal Structure

Structural color generation: from layered thin films to optical metasurfaces

All-Dielectric Gratings with High-Quality Structural Colors

Full Geometric Control of Hidden Color Information in Diffraction Gratings under Angled White Light Illumination

Chromaticity of Structural Color in Polymer Thin Film Photonic Crystals

Large-scale high purity and brightness structural color generation in layered thin film structures via coupled cavity resonance

Controlling the Duty Cycle of Photoresist Gratings by Setting the Guided-Wave Coupling Angles in Monitoring of Photoresist Development

Recent Progress on Structural Coloration

Dynamic Structural Color from Wrinkled Thin Films

Optical Characteristic Analysis of the Failure Phenomena of Photoresist Nanostructure

Exploring the structural color of micro-nano composite gratings with FDTD simulation and experimental validation

Structural Colors: from Plasmonic to Carbon Nanostructures

Wide Gamut, Angle-Insensitive Structural Colors Based on Deep-Subwavelength Bilayer Media

Deterministic rendering of structural color induced by atypical nano-gratings in ultra-precision diamond cutting

Polarized Structure Color from Thin Dielectric Gratings on A Metal Film

Research progress in plasmonic structural colors

Dynamically Tunable Structural Colors Enabled by Pixelated Programming of Soft Materials on Thickness

3D-architected gratings for polarization-sensitive, nature-inspired structural color

Printable structural colors and their emerging applications