Abstract:Demand for lithium-ion batteries (LIBs) has increased dramatically over the years due to the rapid market expansion of electric vehicles. However, many of the essential components of cathode materials, such as cobalt, nickel, manganese and lithium, are resource-limited and expensive[1]. Therefore, recycling of used LIB cathode materials is very important to conserve resources and the environment. Currently, the lithium secondary battery recycling technology mainly uses wet and dry smelting, but there is a disadvantage of high energy consumption due to the use of strong acid and the smelting process[2-3]. In this study, the cathode active material was separated from a pouch-type lithium secondary battery separated from a portable tablet that was over 10 years old and the chemical, structural, and electrochemical characteristics thereof were investigated. The cathode active materials were dismantled from a pouch-type LIB, which was removed from the tablet produced in 2011. The pouch cell was in a swelling state and the OCV was 0V due to internal short is expected. As a result of TGA analysis, the electrode composition was confirmed to be 92wt% of the cathode active material, 3wt% of the conductive agent, and 3wt% of the binder, respectively. The recovery rate of the active material is the best when a mixed solvent including NMP, heating, and ultrasonic, respectively. Through SEM and EDS analysis, copper metal due to dissolution of the negative electrode current collector was found on the surface of the positive electrode. As shown in Fig. 1, It can be seen that the positive electrode active material recovered using the composite solvent is a positive electrode active material that is a mixture of NCM active material and LMO active material. The XRD results shows a well layered structure and a Co 3 O 4 phase due to lithium deficiency. In order to examine the electrochemical characteristics of the recovered electrode, it was reassembled into a 2032 coin type cell and evaluated, and the discharge capacity of approximately 150mAh/g was recovered as shown in Fig. 2. The positive active material recovered according to the experimental results is estimated to be in a state of insufficient lithium, and a lithium compensation process is planned to be additionally performed in the future.

Recycled hierarchical tripod-like CuCl from Cu-PCB waste etchant for lithium ion battery anode.

Recycled Tetrahedron-Like CuCl from Waste Cu Scraps for Lithium Ion Battery Anode.

Facile Fabrication of High-Performance Li-Ion Battery Carbonaceous Anode from Li-Ion Battery Waste

Li-Storage Performances of Copper L-Phenylalanine Complex Nanosheets Anode Derived from Waste Copper Etchant

Eco-friendly strategy for advanced recycling waste copper from spent lithium-ion batteries: Preparation of micro-nano copper powder

High-Performance Pomegranate-Like CuF2 Cathode Derived from Spent Lithium-Ion Batteries

An innovative approach to recover anode from spent lithium-ion battery

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Recycling of mixed lithium-ion battery cathode materials with spent lead-acid battery electrolyte with the assistance of thermodynamic simulations

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

Research for Electrochemical & Structural Properties of Recycling Cathode Materials for End of Life Lib

One-stone, two birds: One step regeneration of discarded copper foil in zinc battery for dendrite-free lithium deposition current collector

Can Aluminum Impurity from Current Collectors Upgrade Spent Li1‐xCoO2 into a High‐Performing Cathode for Lithium‐Ion Batteries?

Recovery of Cathode Copper and Ternary Precursors from Cus Slag Derived by Waste Lithium-Ion Batteries: Process Analysis and Evaluation

From spent graphite to recycle graphite anode for high-performance lithium ion batteries and sodium ion batteries

Exploring a Green Route for Recycling Spent Lithium-Ion Batteries: Revealing and Solving Deep Screening Problem

Graphite Recycling from Spent Lithium-Ion Batteries for Fabrication of High-Performance Aluminum-Ion Batteries

Comprehensive recycling of spent lithium-ion batteries cathodes and anodes via targeted electrochemical redox process

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Sustainable Recycling of Cathode Scrap towards High‐Performance Anode Materials for Li‐Ion Batteries

An Emerging and Consummate Photocatalysis-Assisted Strategy for Efficient Recycling of Spent Lithium-Ion Batteries