Abstract:The enhancement in selectivity of nanofiltration (NF) membranes is of great significance for extending the application areas and improving the process economy, especially for the separation of monovalent/divalent ions. The characteristics of moderately increased pore size, fewer nonselective defects and a more uniform structure are conducive to NF membrane exhibiting higher rejection of divalent ions but lower rejection of monovalent ions. Nonylphenol polyoxyethylene ether (NP-10) was introduced in interfacial polymerization process in this study to optimize the microstructure and surface properties of polyamide (PA) layer to manufacture highly selective NF membranes. The hydrophobic benzene ring and aliphatic chain in NP-10 could form a local space that restricted the interfacial polymerization reaction on the side of the oil phase, thereby appropriately increasing the pore size of the PA layer. It was advantageous to the permeation of water molecules and monovalent ions with a smaller radius. The long hydrophilic oxyethylene group as a guide could facilitate the uniform diffusion of the monomer to the water/hexane interface. NP-10 as an amphiphilic substance would form a self-assembled network at the water/hexane interface, which was expected to optimize the distribution of aqueous amine monomers at the phase interface. Meanwhile, introducing NP-10 can form a stable interface and reduce the interface disturbance, thus inhibiting the formation of non-selective macropores (or “defects”) in PA layer, which could improve the separation selectivity of monovalent/divalent ions. In addition, the hydrophilicity and electronegativity were also enhanced. The results showed that the MWCO of NF membrane increased from 210.1 Da (TFC-0) to 269.6 Da (TFC-0.25), and the average pore radius increased from 0.248 nm to 0.276 nm. The water flux of optimized membrane was doubled compared to the control membrane. Most important, the optimized exhibited higher rejection of divalent Na2SO4 (from 98.07% to 99.43%), and meanwhile lower rejection of monovalent NaCl (from 54.07% to 27.52%). NaCl/Na2SO4 separation factor reached up to 130.53, which was about four times of TFC-0 membrane.

Nanofiltration Membranes with Narrowed Pore Size Distribution Via Pore Wall Modification

Tailoring Pore Size of Positively-Charged Nanofiltration Membrane Via a Facile Self-Assembly Method

Membranes with Negatively-Charged Nanochannels Fabricated from Aqueous Sulfonated Polysulfone Nanoparticles for Enhancing the Rejection of Divalent Anions

Preparation and Characterization of Low-Pressure Nanofiltration Membranes and the Application in the Separation Process of Dye Molecules

Novel Nanofiltration Membrane Prepared by Amphiphilic Random Copolymer Nanoparticles Packing for High-Efficiency Biomolecules Separation

Nanofiltration Membranes with Narrow Pore Size Distribution Via Contra-Diffusion-Induced Mussel-Inspired Chemistry

Pore Size Tailoring from Ultrafiltration to Nanofiltration with PVC-g-PDMA Via Rapid Immersion Thermal Annealing

Tuning of Nanofiltration Membrane by Multifunctionalized Nanovesicles to Enable an Ultrahigh Dye/salt Separation at High Salinity

Ultra-permeable Polyamide Nanofiltration Membrane Modified by Hydrophilic-Hydrophobic Alternated Lignocellulosic Nanofibrils for Efficient Water Reuse

Nanofiltration Membrane with Enhanced Ion Selectivity Based on a Precision-Engineered Ultrathin Polyethylene Supporting Layer

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Designing nanofiltration hollow fiber membranes based on dynamic deposition technology

Preparation of highly selective nanofiltration membranes by moderately increasing pore size and optimizing microstructure of polyamide layer

Tuning the nano-porosity and nano-morphology of nano-filtration (NF) membranes: Divalent metal nitrates modulated inter-facial polymerization

Polyamide‐imide Nanofiltration Hollow Fiber Membranes with Elongation‐induced Nano‐pore Evolution

Unprecedented acid-tolerant ultrathin membranes with finely tuned sub-nanopores for energetic-efficient molecular sieving

Surface Effect-Tailored Polymer Membranes with an Integrated Extra-Thin Separation Layer for Robust Nanofiltration

Exploitation of Amine Groups Cooped up in Polyamide Nanofiltration Membranes to Achieve High Rejection of Micropollutants and High Permeance of Divalent Cations

Ultrafast loose nanofiltration membrane intercalated by in-situ grown nanoparticles for dye purification and reuse

Rigorous Determination of Pore Size Non-Uniformity for Nanofiltration Membranes by Incorporating the Effects on Mass Transport

Superior Nanofiltration Membranes with Gradient Cross-Linked Selective Layer Fabricated Via Controlled Hydrolysis