Abstract:In this paper, electro-Fenton and sulfate radical-based electro-Fenton-like processes were used to degrade artificial sweeteners and azo dye. The results obtained during the research concern the removal efficiency, the oxidation mechanism, degradation pathway and toxicity evolution of target pollutants.(1) Electro-Fenton process was a effective method for the degradation of ASP in water. The removal and mineralization rate was affected by the Fe2+ concentration and applied current. The absolute rate constant of hydroxylation reaction of ASP was (5.23 ± 0.02) × 109 M–1 S–1. Short-chain aliphatic acids such as oxalic, oxamic and maleic acid were identified as aliphatic intermediates in the electro-Fenton process. The bacteria luminescence inhibition showed the toxicity of ASP solution decreased after it reached a maximum during the first period of the oxidation reaction.(2) Artificial sweetener SAC could be degraded effectively by electro-Fenton process with a DSA, Pt or BDD anode. However, the using of BDD anode could accelerate the mineralization of SAC. The optimal conditions for SAC removal were SAC concentration 0.2 mM, Fe2+ concentration 0.2 mM, Na2SO4 concentration 50 mM, applied current 200 mA and initial pH 3.0. Oxalic, formic, and maleic acid were observed as aliphatic byproducts of SAC during electro-Fenton process. The bacteria luminescence inhibition showed the toxicity of SAC solution increased at the beginning of electrolysis, and then it declined until the end of the reaction.(3) Artificial sweetener Sucralose could be completely mineralized in a 360 min reaction by electro-Fenton process with a Pt or BDD anode. The mineralization rate was affected by the Fe2+ concentration and applied current. The mineralization current efficiency (MCE) decreased with rising applied current from 100 to 500 mA with both Pt and BDD anode. Oxalic, pyruvic, formic and glycolic acids were detected during the oxidation of sucralose.(4) Orange II was effectively decolorized by EC/α-FeOOH/PDS process. The initial pH of Orange II solution had little effect on the decolorization of Orange II. RSM based on Box-Behnken statistical experiment design was applied to analyze the experimental variables. The response surface methodology models were derived based on the results of the pseudo-first-order decolorization rate constant and the response surface plots were developed accordingly. The results indicated the applied current showed a positive effect on the decolorization rate constant of Orange II. The interaction of α-FeOOH dosage and PDS concentration was significant. The ANOVA results confirmed that the proposed models were accurate and reiable for the analysis of the varibles of EC/α-FeOOH/PDS process. The catalystα-FeOOH showed good structural stability and could be reused.(5) Aqueous solutions of Orange II have been degraded effectively in the EC/Fe3O4/PDS process. The decolorization rate was affected by the initial pH of Orange II solution, current density, PDS concentration and Fe3O4 dosage. Orange II can be totally decolorizated in a 60 min reaction when initial Orange II concentration was 25 mg/L, PDS concentration was 10 mM, Fe3O4 dosage was 0.8 g/L, current density was 8.4 mA/cm2 and initial pH was 6.0. Recycle experiments showed Fe3O4 particles were stable and can be reused. XPS spectrum indicated Fe(II) was generated on the surface of Fe3O4 particles after reaction. The main intermediates were separated and identified by GC-MS technique and a plausible degradation pathway of Orange II was proposed

Effect of Chelating Agents on Reactive Green 19 Decolorization Through Fe0-activated Persulfate Oxidation Process

Degradation of the Earthy and Musty Odorant 2,4,6-Tricholoroanisole by Persulfate Activated with Iron of Different Valences.

Influence of Chelating Agents on Fenton-Type Reaction Using Ferrous Ion and Hypochlorous Acid

Effect of Chelators on the Production and Nature of the Reactive Intermediates Formed in Fe(II) Activated Peroxydisulfate and Hydrogen Peroxide Processes.

[Properties of Pesudomonas Sp. DN-1 in Reduction of Nitric Oxide Chelate Absorption Solution].

A Mini-Review on the Use of Chelating or Reducing Agents to Improve Fe(II)-Fe(III) Cycles in Persulfate/Fe(II) Systems

Enhanced Degradation of BDE209 in Spiked Soil by Ferrous-Activated Persulfate Process with Chelating Agents.

Mechanism and Influence Factors of 2,4‐D Dechlorination by Sodium Citrate‐activated Bimetallic Palladium‐zero Valent Iron Nanoparticles

Activation of persulfate by iron‐loaded soybean straw biochar for efficient degradation of dye contaminants: Synthesis, performance, and mechanism

Degradation of trichloroethylene in aqueous solution by persulfate activated with Fe(III)–EDDS complex

Degradation of Acid Orange 7 in aqueous solution by a novel electro/Fe2+/peroxydisulfate process

Activating persulfate by Fe⁰ coupling with weak magnetic field: performance and mechanism.

Degradation of trichloroethylene in aqueous solution by persulfate activated with citric acid chelated ferrous ion

Enhancement Effects of Chelating Agents on the Degradation of Tetrachloroethene in Fe(Iii) Catalyzed Percarbonate System

Efficient composite chlorinated ethenes removal using gallic acid to enhance Fe/Ni nanoparticles activated persulfate

Ph Dependent Degradation of Trichloroethylene by Persulfate Activated with Chelated-Fe(II) in the Presence of Sodium Dodecyl Sulfate

Comparative Studies of Organic Contaminant Removal in Different Calcium Sulfite-Enhanced Oxidant/fe(ii) Systems: Kinetics, Mechanisms, and Differentiated Degradation Pathways.

Removal of Organic Pollutants from Water by Electro-Fenton and Electro-Fenton Like Processes

Electro-Fenton method for the removal of methyl red in an efficient electrochemical system

Mechanistic Study of Fe(III) Chelate Reduction in a Neutral Electro-Fenton Process

Siderite with chelator as high-efficiency Fenton reagent to degrade naphthalene via ferrous liberation and carbon dioxide radical anion-mediated iron redox cycle