Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Influence of Chelating Agents on Fenton-Type Reaction Using Ferrous Ion and Hypochlorous Acid

Ferrous ion-tartaric acid chelation promoted calcium peroxide fenton-like reactions for simulated organic wastewater treatment

The overlooked role of electrostatic repulsion between nanoparticle catalysts in ligand-enhanced heterogeneous Fenton-like reactions

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Are iron chelates suitable to perform photo-Fenton at neutral pH for secondary effluent treatment?

Enhancement of the electro-Fenton degradation of organic contaminant by accelerating Fe3+/Fe2+ cycle using hydroxylamine

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Fe(III)–EDDS Complex in Fenton and Photo-Fenton Processes: from the Radical Formation to the Degradation of a Target Compound

Decomplexation of Ni-EDTA enhanced by Fe(III) reduction in the Fenton reaction: Insight into the role of carbonyl groups

Assessment of iron chelates efficiency for photo-Fenton at neutral pH

Coupling-promoted Oxidative Degradation of Organic Micropollutants by Iron Oxychloride (feocl) with Dual Active Sites

Hydrogen accelerated regeneration of FeII in Fenton reaction enhanced by Pd/MOF-808(Zr)

Enhanced redox degradation of chlorinated hydrocarbons by the Fe(II)-catalyzed calcium peroxide system in the presence of formic acid and citric acid

Novel activated system of ferrate oxidation on organic substances degradation: Fe(VI) regeneration or Fe(VI) reduction

Siderite with chelator as high-efficiency Fenton reagent to degrade naphthalene via ferrous liberation and carbon dioxide radical anion-mediated iron redox cycle

Performance and Oxidation Mechanism of VUV Photo–fenton in Simultaneous Removal of Ni-EDTA and Hypophosphite: Decomplexation, Low-Valent Phosphorous Oxidation and DFT Calculation

Effect of carboxylic acids in the decomposition of H2O2 in Fenton processes for the degradation of agrochemicals

Influence and mechanism of water matrices on H2O2-based Fenton-like oxidation processes: A review

Overlooked enhancement of chloride ion on the transformation of reactive species in peroxymonosulfate/Fe(II)/NH2OH system

Catalytic activity and mechanism of typical iron-based catalysts for Fenton-like oxidation

Efficient wastewater disinfection through FeOOH-mediated photo-Fenton reaction: A review