Kinetic modeling of an anaerobic fixed-bed reactor treating industrial wastewater containing hydrothermally solubilized sugarcane bagasse and post-treatment evaluation
Bing Liu,Anh Van Ngo,Meng Sun,Jing Wang,Nguyen The Anh,Mitsuharu Terashima,Hidenari Yasui
DOI: https://doi.org/10.5004/dwt.2020.25857
IF: 1.1
2020-01-01
Desalination and Water Treatment
Abstract:Bioethanol has emerged as a major alternative and environment-friendly fuel to face with energy consumption increasing in recent decades. In bioethanol processing factories, new technologies using steam explosion pretreatments are developed to improve ethanol production from cellulose (e.g. sugarcane bagasse). However, wastewater from this step with high chemical oxygen demand (COD), high soluble total organic carbon (S-TOC), low pH, and dark brown color cause serious environmental problems. This research focused on the high-rate anaerobic wastewater treatment from bioethanol production using a fixed-bed reactor. A 10.8 L lab-scale reactor was continuously operated at 35°C for 160 d with a volumetric loading rate of 10.9 kg-COD/m3/d. A kinetic model based on a modification of anaerobic digestion model no. 1 and activated sludge models was used to reasonably simulate the methane production, soluble TOC, suspended solid as well as the soluble effluent constituents in terms of carbohydrate, protein, propionate, acetate, lignin, and ammonium nitrogen. The steady-state simulation results showed that 45% of COD was converted to methane with a high organic loading rate (9.72 kg-COD/m3/d). In addition, tests using physicochemical methods were conducted to remove un-biodegradable materials and color from the effluent. Oxidation, coagulation/flocculation, and adsorption removed 88% of soluble TOC and 98% of color.
engineering, chemical,water resources