Abstract:Abstract Thermoplastic elastomers are rubbery materials which can be fabricated by techniques usually associated with thermoplastic resins. Classical elastomers rely upon the crosslinked network, developed during vulcanization, to provide the retractive forces of rubber type elasticity. Thermoplastic elastomers contain rubber domains and resinous thermoplastic domains. The thermoplasticity results from the melting characteristics of the hard thermoplastic phase, while the rubber properties arise from the rubbery domains. Thermoplastic elastomers are, therefore, almost by definition, heterogeneous in their phase morphology. Such materials can be blends or block polymers. In the case of block polymers, the rubbery phase is not crosslinked chemically. However, hard or resinous phase domains occur as the hard segments of the block polymer which separate from the composition by agglomeration during cooling from the molten state. These domains act both as well-bonded reinforcing filler particles and as crosslinks. This is, of course, because the hard blocks are connected to the soft or rubbery segments by primary chemical bonds. In the case of the blend compositions, the hard and soft domains are separate polymeric species. However, there must be some form of interaction between the domains if useful properties are to be realized. Recently, uncured or partially cured EPDM rubber has been blended with polyolefin resin to make thermoplastic elastomer-like compositions. However, these compositions suffer deficiencies in performance as well as in certain aspects of fabricability. Only poor to fair performance at temperatures above 70°C in air or in oil has been achieved with the uncured to partially cured compositions. More recently, it has been found in our laboratories that fully cured EPDM compositions which are fabricable as thermoplastics can be prepared. Such compositions, referred to here as thermoplastic vulcanizates, have superior strength, high-temperature mechanical properties, hot oil and solvent resistance, better compression set, etc. This report outlines critical parameters associated with these unique materials.

Rubber-Thermoplastic Compositions. Part II. NBR-Nylon Thermoplastic Elastomeric Compositions

Rubber-Thermoplastic Compositions. Part I. EPDM-Polypropylene Thermoplastic Vulcanizates

Dynamically Vulcanized Nitrile Rubber/polyoxymethylene Thermoplastic Elastomers

Thermoplastic Elastomeric Blends of Nylon-6/Acrylate Rubber: Influence of Interaction on Mechanical and Dynamic Mechanical Thermal Properties

Dynamically Vulcanized Ethylene Propylene Diene Terpolymer/nylon Thermoplastic Elastomers

Preparation and Properties of Nitrile Rubber/nylon 6 Thermoplastic Elastomers by Dynamic Vulcanization

Preparation and properties of nitrile rubber/nylon 12 thermoplastic elastomer by dynamic vulcanization

Preparation of ABS/NBR Thermoplastic Elastomer

Rubber-Thermoplastic Compositions. Part III. Predicting Elastic Moduli of Melt Mixed Rubber-Plastic Blends

Synthesis and Applications of Hydroxyproline-derived Thermoplastic Elastomers

Rubbery nanofibers by co-electrospinning of almost immiscible NBR and PCL blends

Development of halloysite nanotubes reinforced chlorinated ethylene propylene diene monomer/chlorinated acrylonitrile butadiene rubber blends

Elasto-Plastic Materials based on EPDM Rubber, LDPE, Plasticized Starch and OMMT

Mechanical, thermal and transport properties of nitrile rubber (NBR)—nanoclay composites

The preparation of high flexibility nylon 1010 materials

Bio-based thermoplastic natural rubber based on poly(lactic acid)/thermoplastic starch/calcium carbonate nanocomposites

Preparation of fully cross-linked CNBR/PP-g-GMA and CNBR/PP/PP-g-GMA thermoplastic elastomers and their morphology, structure and properties

Industrialization of NBR/PP Thermoplastic Elastomer

Supersoft Norbornene‐Based Thermoplastic Elastomers with High Strength and Upper Service Temperature

General Purpose Elastomers: Structure, Chemistry, Physics and Performance

Polyesteramidesulfone as novel reinforcement and antioxidant nanofiller for NBR blended with reclaimed natural rubber