Abstract:Aiming at the problem of serious deviation from the actual energy consumption for the calculated energy consumption with the continuous operation mode prescribed in current design standard for residential building energy efficiency in hot summer and cold winter zone, a questionnaire survey for the use mode of air conditioner has been conducted in Hangzhou, a typical city in this climate zone. It was found that there widely exists intermittent energy consuming method in the residential buildings of this area. The air conditioning using behavior was affected by thermal feeling of human body. The greater the indoor air temperature deviates from the the human body comfort scope, the higher the air conditioning opening rate is. DeST was employed to calculate the annual energy consumption of the residential building with internal and external wall insulations under different occupant behaviors, and then the annual energy saving effects were analyzed. The results show that in continuous energy consuming method, the annual energy saving effect for external insulation is better than that for internal insulation;in intermittent energy consuming method without considering tolerate temperature, the annual energy saving effect for internal insulation is better than that for external insulation. Under the condition of variable tolerate temperature, the critical tolerate temperature point for internal and external insulation with the same energy saving effect is 31.8 ℃ in summer and 13.4 ℃ in winter. When tolerate temperature is lower than the critical point, the internal insulation has better energy saving effect; when tolerate temperature is higher than the critical point, the external insulation has better energy saving effect. The choice of reasonable insulation means in this region was greatly affected by the air?conditioning behaviors and occupants’ thermal tolerance. The critical tolerate temperature for the same energy saving of the internal and external insulations is 31.8℃ in summer and 13.4℃ in winter. Therefore, setting reasonable air?conditioning behavior in the design standard for energy efficiency is an important premise for accurately evaluating the energy saving effect of exterior wall insulation measures.

Effect of different air supply parameters on UFAD system performance

Influence on energy saving effects of internal and external wall insulations for different occupant behaviors

Cooling effect of air movement on heating performances of advanced air distribution

Uniformity of Supply Air in the Plenum for Under-Floor Air Distribution Ventilation in a Circular Conference Room: A CFD Study

Thermal comfort and indoor air quality in rooms with integrated personalized ventilation and under-floor air distribution systems

Case Study: Impacts of Air-Conditioner Air Supply Strategy on Thermal Environment and Energy Consumption in Offices Using BES-CFD Co-Simulation

Air supply parameter optimization of a custom nonuniform temperature field based on the POD method

Effects of Air Supply Terminal Devices on the Performance of Variable Refrigerant Flow Integrated Stratum Ventilation System: An Experimental Study

A comprehensive numerical study of the effects of the air distribution terminals on the performance of a novel VRF-SV hybrid system

THE ENERGYPLUS UFAD MODULE

Demand-oriented differentiated multi-zone thermal environment: Regulating air supply direction and velocity under stratum ventilation

Implementation of Demand-Oriented Ventilation with Adjustable Fan Network

Influence of Diffuser Jet Characteristics on Indoor Air Distribution under Actual Connecting Conditions

Full-scale numerical simulation and experimental validation of the thermal environment under the heating mode in an air-conditioned room

Comparison study of thermal comfort and energy saving under eight different ventilation modes for space heating

Numerical Simulation of the Influence of the New Air Volume of Fresh Air Exchanger on the Indoor Flow Field of the Residence

Effect on Thermal Comfort and Energy Consumption of Different Installation Height and Supply Air Angle of Room Air Conditioner by Simulation

Study of residential underfloor air distribution (UFAD) systems using a new modelling approach

Numerical Study on Coupled Operation of Stratified Air Distribution System and Natural Ventilation under Multi-Variable Factors in Large Space Buildings

Experimental Investigation on Indoor Environment and Energy Performance of Convective Terminals

Smart air supply terminal for floor-standing room air conditioners based on the identification of human positions