Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Simulation and optimization of shell-tube heat exchanger for CO; removal

Development and Validation of Helical-Coil-in-fluted-tube Gas Cooler for CO2 Heat Pump Water Heaters

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

The Coupled Process-Component Modeling and Optimization for Heat Exchanger of Supercritical CO2 with Property Variation Based on Heat Current Method

An optimization of microtube heat exchangers for supercritical CO2 cooling based on numerical and theoretical analysis

The simulation and analysis of fin-tube heat exchanger using CO_2 as working fluid

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

PERFORMANCE SIMULATION ON THE SHELL AND TUBE OF HEAT EXCHANGER BY ASPEN HYSYS V.10

Thermal-economic optimization design of shell and tube heat exchanger using an improved sparrow search algorithm

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

Optimal design for dual-stage high temperature heat pump by heat exchange area simulation

Investigation of heat transfer Exergy loss number and its application in optimization for the shell and helically coiled tube heat exchanger

HEAT EXCHANGER DESIGN OPTIMISATION

Simulation and Optimization of CO2 Fin-tube Gas Cooler

Configuration Optimization of a Shell-and-Tube Heat Exchanger with Segmental Baffles Based on Combination of NSGAII and MOPSO Embedded Grouping Cooperative Coevolution Strategy

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Simulation and Optimization of Carbon Dioxide Automobile Air Conditioner

Optimization of COTransmission Processes

Optimization-Inspired Pin-Fin Array for Supercritical Carbon Dioxide Recuperator

Application of Simulated Annealing Algorithm for Improvement of Optimal Design of Tube-Shell Type Heat Exchangers