Abstract:Liquid–liquid equilibrium (LLE) data are critical for the design and optimization of processes for extracting aromatics. Partial LLE data for the non-aromatic–aromatic–sulfolane ternary system were acquired at 313.15 K and 101.3 kPa. The LLE data for the extraction of aromatics using sulfolane were predicted using the COSMO-RS model. Correspondingly, the predicted and experimental data were analyzed using the root mean square deviation (RMSD), distribution coefficient (D), and separation factor (S). The COSMO-RS model could better predict the LLE data for the extraction of aromatics by sulfolane. The results of quantum chemical calculation show that hydrogen bonds and van der Waals interactions between sulfolane–benzene and sulfolane–toluene were responsible for the strong selectivity of sulfolane for benzene and toluene over alkanes. The LLE data predicted by the COSMO-RS method using the UNIQUAC thermodynamic model were subjected to correlation analysis. The calculated RMSD values were all less than 0.0180, and the relative deviation (δ) between the simulated value of the main process index for the extraction column and the actual data was less than 2.5%, indicating that the obtained binary interaction parameters can be reliably used in designing and optimizing the extraction of aromatics using sulfolane.

LLE DETERMINATION FOR THE EXTRACTION OF AROMATIC HYDROCARBONS WITH SULFONLANE AND ITS PREDICTION BY UNIFAC MODEL

Liquid−Liquid Equilibria for the Ternary System Water + Acetic Acid + Propyl Acetate

Prediction, Application, and Mechanism Exploration of Liquid–Liquid Equilibrium Data in the Extraction of Aromatics Using Sulfolane

A Regular Solution-Group Contribution Model and Its Application to the Extraction Process of Aromatic Hydrocarbons with Sulfonlane

Phase Equilibrium Calculations in Mixtures Containing Caprolactam with a UNIFAC Model

Liquid−Liquid Equilibria for Aromatics Extraction Systems with Tetraethylene Glycol

Determination and correlation of LLE data for n-hexane, ethyl acetate and different extractants

Measurement and correlation of liquid-liquid equilibrium for the ternary system (water + 1,2-dichloroethane + sulfolane) at 288.15, 298.15, and 308.15 K

An Application of UNIFAC Equation to H;O-n-C;H;-D;EHPA-LaCl;-HCl Extraction System

Liquid-liquid equilibria of the quaternary system water + caprolactam + 1-octanol + ammonium sulfate

Liquid-liquid Equilibrium Study for Ternary Systems of (water + Furfuryl Alcohol + Solvents) at 298.2 K: Measurement and Thermodynamic Modelling

Liquid liquid equilibria of the quaternary system water plus caprolactam plus 1 octanol plus ammonium sulfate

The predictive capability of the UNIFAC equation for the calculation of liquid-liquid equilibria with chemical reactions in Tributyl Phosphate Extraction Systems for Nitric Acid and Uranyl Nitrate

Liquid-liquid equilibria of ternary and quaternary systems including cyclohexane, 1-heptene, benzene, toluene, and sulfolane at 298.15 K

Measurement and prediction of isothermal vapor-liquid equilibrium of α-pinene + camphene/longifolene + abietic acid + palustric acid + neoabietic acid systems

Liquid−Liquid Equilibria of Quaternary and Quinary Systems Including Sulfolane at 298.15 K

Liquid–liquid Equilibria of Multi-Component Systems Including N-Hexane, N-Octane, Benzene, Toluene, Xylene and Sulfolane at 298.15 K and Atmospheric Pressure

Prediction of Solubility for Solvent/Polymer Mixture with UNIFAC-FV and GCLF-EOS Model

Measurement and Correlation of the Liquid–Liquid Equilibrium for the Quaternary System N -Butanol + N -Pentanol + N -Hexanol + Water at 313.15, 323.15, and 333.15 K

Liquid-Liquid Equilibrium for the Multiphase System of Benzene-p-Xylene-Heptane-1,2-Ethanediol-N-methyl-2-Pyrrolidone

Isothermal Vapor–Liquid Equilibrium for Linalool + Linalyl Acetate, Linalool + α-Terpineol, and α-Terpineol + Linalyl Acetate Systems Using Headspace Gas Chromatography