Abstract:The application of advanced technologies for engine efficiency improvement and emissions reduction also increase the occurrence possibility of abnormal combustions such as incomplete combustion, misfire, knock or pre-ignition. Novel promising combustion modes, which are basically dominated by chemical reaction kinetics show a major difficulty in combustion control. The challenge in precise combustion control is hard to overcome by the traditional engine map-based control method because it cannot monitor the combustion state of each cycle, hence, real-time cycle-resolved in-cylinder combustion diagnosis and control are required. In the past, cylinder pressure and ion current sensors, as the two most commonly used sensors for in-cylinder combustion diagnosis and control, have enjoyed a seemingly competitive relationship, so all related researches only use one of the sensors. However, these two sensors have their own unique features. In this study, the idea is to combine the information obtained from both sensors. At first, two kinds of ion current detection system are comprehensively introduced and compared at the hardware level and signal level. The most promising variant (the DC-Power ion current detection system) is selected for the subsequent experiments. Then, the concept of ion current/cylinder pressure cooperative combustion diagnosis and control system is illustrated and implemented on the engine prototyping control unit. One application case of employing this system for homogenous charge compression ignition abnormal combustion control and its stability improvement is introduced. The results show that a combination of ion current and cylinder pressure signals can provide richer and also necessary information for combustion control. Finally, ion current and cylinder pressure signals are employed as inputs of artificial neural network (ANN) models for combustion prediction. The results show that the combustion prediction performance is better when the inputs are a combination of both signals, instead of using only one of them. This offline analysis proves the feasibility of using an ANN-based model whose inputs are a combination of ion current and pressure signals for better prediction accuracy.

A new method of diagnosing in\|cylinder combustion deficiency based on fuzzy classification theory

A Novel Fuzzy Fusion Method Based Deviation and Its Application on Furnace

A Novel Approach of Analog Circuit Sensor Fault Diagnosis Using Fuzzy Integrated Binary Support Vector Machines

A Method Combining Order Tracking and Fuzzy C-Means for Diesel Engine Fault Detection and Isolation

Engine Fault Diagnosis by Crank Speed Fluctuation

Fuzzy mathematics applied to the study of real-time diagnostic system for engine's noise failures

Development and Application of Ion Current/Cylinder Pressure Cooperative Combustion Diagnosis and Control System

Fault diagnosis of engine based on exhaust density analysis and support vector machines

Numerical Investigation of the Fuel/Air Ratio Sensor Sensitivity in a Port-Fuel-Injected Spark-Ignition Engine Equipped with Three-Way Catalysts

Fault Diagnosis And Prevention Of Flow Sensor For Fuel Supply System

An Approach on Fault Detection in Diesel Engine by Using Symmetrical Polar Coordinates and Image Recognition

Diesel fuel injection system faults diagnosis based on fuzzy injection pressure pattern recognition

Intelligent Diagnosis of V-Type Marine Diesel Engines Based on Multifeatures Extracted from Instantaneous Crankshaft Speed

A FUZZY AND ROUGH SETS INTEGRATED APPROACH TO FAULT DIAGNOSIS

Characterization of In-Cylinder Combustion Temperature Based on a Flame-Image Processing Technique

A fuzzy based semi-supervised method for fault diagnosis and performance evaluation

Study on the Relationship between Combustion Parameters and Cylinder Head Vibration Signal in Time Domain

Fuzzy support vector machine and its application to mechanical condition monitoring

Diesel engine fault diagnosis method based on instantaneous angular speed fluctuation ratio

Advanced gasoline engine misfire diagnostic method based on crankshaft speed multiple filtering

R & D of Fault Diagnosis of a New Electronic Control System of Engines