Abstract:In this study, we utilized the response surface method (RSM) and the long short‐term memory (LSTM) model to optimize operational parameters and predict chemical oxygen demand (COD) removal in the electrocoagulation‐catalytic ozonation process (ECOP) for pharmaceutical wastewater treatment. RSM identified optimal conditions, while LSTM predicted COD removal close to actual with higher accuracy, showcasing its superiority in predictive capability and potential for precise ECOP control. In this study, we employed the response surface method (RSM) and the long short‐term memory (LSTM) model to optimize operational parameters and predict chemical oxygen demand (COD) removal in the electrocoagulation‐catalytic ozonation process (ECOP) for pharmaceutical wastewater treatment. Through RSM simulation, we quantified the effects of reaction time, ozone dose, current density, and catalyst packed rate on COD removal. Then, the optimal conditions for achieving a COD removal efficiency exceeding 50% were identified. After evaluating ECOP performance under optimized conditions, LSTM predicted COD removal (56.4%), close to real results (54.6%) with a 0.2% error. LSTM outperformed RSM in predictive capacity for COD removal. In response to the initial COD concentration and effluent discharge standards, intelligent adjustment of operating parameters becomes feasible, facilitating precise control of the ECOP performance based on this LSTM model. This intelligent control strategy holds promise for enhancing the efficiency of ECOP in real pharmaceutical wastewater treatment scenarios. Practitioner Points This study utilized the response surface method (RSM) and the long short‐term memory (LSTM) model for pharmaceutical wastewater treatment optimization. LSTM predicted COD removal (56.4%) closely matched experimental results (54.6%), with a minimal error of 0.2%. LSTM demonstrated superior predictive capacity, enabling intelligent parameter adjustments for enhanced process control. Intelligent control strategy based on LSTM holds promise for improving electrocoagulation‐catalytic ozonation process efficiency in pharmaceutical wastewater treatment.

Prediction of Recycle Effect on the Effluent COD Concentration of an Upflow Anaerobic Filter

Prediction of the Effect of Recirculation on the Effluent Quality of Anaerobic Filters by Empirical Models

Performance of an anaerobic filter treating soybean processing wastewater with and without effluent recycle

An Empirical Model for Predicting the Organic Concentration of Anaerobic Filter Effluents

A Comparative Study Of Conventional Coagulation And Sludge Recycling Enhanced Coagulation For Low-Turbidity Source Water: The Effect And Applicability

The accumulation of nonylphenol in a wastewater recycling process.

Early-warning on the Performance of Novel High-Rate Anaerobic Bioreactor

Prediction of the effluent chemical oxygen demand and volatile fatty acids for anaerobic treatment based on different feature selections machine-learning methods from lab-scale to pilot-scale

Kinetic analysis of an anaerobic filter treating soybean wastewater

Performance and membrane fouling behaviors analysis with SVR-LibSVM model in a submerged anaerobic membrane bioreactor treating low-strength domestic sewage

Simulation and prediction based on BP neural network for COD treatment by earthworm filter

Real-time prediction of the chemical oxygen demand component parameters in activated sludge model using backpropagation neural network

Accurate prediction and intelligent control of COD and other parameters removal from pharmaceutical wastewater using electrocoagulation coupled with catalytic ozonation process

Using LSTM Neural Network Based on Improved PSO and Attention Mechanism for Predicting the Effluent COD in a Wastewater Treatment Plant

Study on a Discrete-Time Dynamic Control Model to Enhance Nitrogen Removal with Fluctuation of Influent in Oxidation Ditches.

Enhancing wastewater treatment efficiency through machine learning-driven effluent quality prediction: A plant-level analysis

Inorganic ion accumulation model in wastewater recycling systems: Printing and dyeing case

Simulating and Predicting the Flux Change of Reverse Osmosis Membranes over Time During Wastewater Reclamation Caused by Organic Fouling.

Mathematical Simulation of Feedforward Control for Nutrient Removal in Anaerobic-Anoxic-oxic Processes.

Comparison and Modeling of Two Biofilm Processes Applied to Decentralized Wastewater Treatment

Enhancing the effluent prediction accuracy with insufficient data based on transfer learning and LSTM algorithm in WWTPs