Abstract:Liquid-phase deposition of exfoliated 2D nanosheets is the basis for emerging technologies that include writable electronic inks, molecular barriers, selective membranes, and protective coatings against fouling or corrosion. These nanosheet thin films have complex internal structures that are discontinuous assemblies of irregularly tiled micron-scale sheets held together by van der Waals (vdW) forces. On stiff substrates, nanosheet vdW films are stable to many common stresses, but can fail by internal delamination under shear stress associated with handling or abrasion. This "re-exfoliation" pathway is an intrinsic feature of stacked vdW films and can limit nanosheet-based technologies. Here we investigate the shear stability of graphene oxide and MoSe2 nanosheet vdW films through lap shear experiments on polymer-nanosheet-polymer laminates. These sandwich laminate structures fail in mixed cohesive and interfacial mode with critical shear forces from 40 - 140 kPa and fracture energies ranging from 0.2 - 6 J/m2. Surprisingly these energies are higher than delamination energies reported for smooth peeling of ordered stacks of continuous 2D sheets, which we propose is due to energy dissipation and chaotic crack motion during nanosheet film disassembly at the crack tip. Experiment results also show that film thickness plays a key role in determining critical shear force (maximum load before failure) and dissipated energy for different nanosheet vdW films. Using a mechanical model with an edge crack in the thin nanosheet film, we propose a shear-to-tensile failure mode transition to explain a maximum in critical shear force for graphene oxide films but not MoSe2 films. This transition reflects a weakening of the substrate confinement effect and increasing rotational deformation near the film edge as the film thickness increases. For graphene oxide, the critical shear force can be increased by electrostatic cross-linking achieved through interlayer incorporation of metal cations. These results have important implications for the stability of functional devices that employ 2D nanosheet coatings.

Exploration of the form factors of turbulence kinetic energy transfer for shear exfoliation of graphene

Mechanical Exfoliation of Two-Dimensional Materials

Impact of Ultrasonic Probe Type, Frequency, and Static Pressure on Large-Scale Graphene Exfoliation

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

Equipartition of Energy Defines the Size-Thickness Relationship in Liquid-Exfoliated Nanosheets

Exfoliation mechanisms of 2D materials and their applications

A high-yield and size-controlled production of graphene by optimizing fluid forces

Novel Cyclic Ultrasound-Assisted Liquid Phase Exfoliation of Graphene in Deionized Water: A Parameter Study

Edge Orientations of Mechanically Exfoliated Anisotropic Two-Dimensional Materials

Liquid Phase Graphene Exfoliation with a Vibration-Based Acoustofluidic Effector

Liquid exfoliation of multilayer graphene in sheared solvents: A molecular dynamics investigation

Controlled Inertial Cavitation as a Route to High Yield Liquid Phase Exfoliation of Graphene

Shear failure in supported two-dimensional nanosheet van der Waals thin films

New progress and prospects of mechanical exfoliation technology of two-dimensional materials

Two-Dimensional Nanosheets by Rapid and Efficient Microwave Exfoliation of Layered Materials

High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation

Ultrasound cavitation and exfoliation dynamics of 2D materials re-vealed in operando by X-ray free electron laser megahertz imaging

Viscous Solvent-Assisted Planetary Ball Milling for the Scalable Production of Large Ultrathin Two-Dimensional Materials

Fragmentation and structural transitions of few-layer graphene under high shear stress

Facile And Green Production Of Impurity-Free Aqueous Solutions Of Ws2 Nanosheets By Direct Exfoliation In Water

Liquid Phase Exfoliation of Two-Dimensional Materials by Directly Probing and Matching Surface Tension Components.