Abstract:In Part I [Appl. Opt.58, 6067 (2019)APOPAI003-693510.1364/AO.58.006067], we used a coupled optoelectronic model to optimize a thin-film C u I n 1-ξ G a ξ S e 2 (CIGS) solar cell with a graded-bandgap photon-absorbing layer and a periodically corrugated backreflector. The increase in efficiency due to the periodic corrugation was found to be tiny and that, too, only for very thin CIGS layers. Also, it was predicted that linear bandgap-grading enhances the efficiency of the CIGS solar cells. However, a significant improvement in solar cell efficiency was found using a nonlinearly (sinusoidally) graded-bandgap CIGS photon-absorbing layer. The optoelectronic model comprised two submodels: optical and electrical. The electrical submodel applied the hybridizable discontinuous Galerkin (HDG) scheme directly to equations for the drift and diffusion of charge carriers. As our HDG scheme sometimes fails due to negative carrier densities arising during the solution process, we devised a new, to the best of our knowledge, computational scheme using the finite-difference method, which also reduces the overall computational cost of optimization. An unfortunate normalization error in the electrical submodel in Part I came to light. This normalization error did not change the overall conclusions reported in Part I; however, some specifics did change. The new algorithm for the electrical submodel is reported here along with updated numerical results. We re-optimized the solar cells containing a CIGS photon-absorbing layer with either (i) a homogeneous bandgap, (ii) a linearly graded bandgap, or (iii) a nonlinearly graded bandgap. Considering the meager increase in efficiency with the periodic corrugation and additional complexity in the fabrication process, we opted for a flat backreflector. The new algorithm is significantly faster than the previous algorithm. Our new results confirm efficiency enhancement of 84% (resp. 63%) when the thickness of the CIGS layer is 600 nm (resp. 2200 nm), similarly to Part I. A hundredfold concentration of sunlight can increase the efficiency by an additional 27%. Finally, the currently used 110-nm-thick layer of M g F 2 performs almost as well as optimal single- and double-layer antireflection coatings.

Enhancement of Light Absorption by Ultra-Thin Film Solar Cells Using Graded Gratings

Embedded Surface Relief Gratings by a Simple Method to Improve Absorption and Electrical Properties of Polymer Solar Cells.

Gaussian grating for enhancing light absorption by amorphous silicon thin-film solar cells

Efficient Inverted Polymer Solar Cells with Directly Patterned Active Layer and Silver Back Grating

Absorption enhancement of thin film solar cells using back binary metallic grating

Thin Film Solar Cells Based on Cavity Enhanced Grating Structure

Hybrid Gratings for Complementary Absorption Enhancement in Ultra-thin Film Solar Cells

Double grating high efficiency nanostructured silicon-based ultra-thin solar cells

Efficiency Enhancement of Ultra-thin CIGS Solar Cells Using Bandgap Grading and Embedding Au Plasmonic Nanoparticles

Broadband absorption enhancement in hole-transport-layer-free perovskite solar cell by grating structure

Broadband Antireflection and Absorption Enhancement of Ultrathin Silicon Solar Microcells Enabled with Density-Graded Surface Nanostructures

Optical Enhancement of Organic Solar Cells with Metallic Gratings

Compositionally Graded Absorber for Efficient and Stable Near‐Infrared‐Transparent Perovskite Solar Cells

Full‐Spectrum Absorption Enhancement in a‐Si:H Thin‐Film Solar Cell with a Composite Light‐Trapping Structure

Efficiency enhancement of ultrathin CIGS solar cells by optimal bandgap grading. Part II: finite-difference algorithm and double-layer antireflection coatings

Light Absorption Enhancement of Amorphous Silicon Film Coupled with Metal Nanoshells

Efficient Light Trapping Structure in Thin Film Silicon Solar Cells

GaAs Thin-Film Solar Cells for Perfect Absorption in the Visible and Near-Infrared Bands

Absorption enhancement for solar cells structured with quasi-periodic grating

Thin-film silicon solar cells: photonic design, process and fundamentals

A Design of A-Si Thin Film Solar Cell with a Dual Grating for Long Wavelength Absorption Enhancement