Abstract:Deadbeat predictive current control (DBPCC) has the characteristic of fast current response, but it is sensitive to motor parameters. Observer-based DBPCC can eliminate the steady state current tracking error when parameter mismatch exists. However, the actual current will deviate from the reference current during transient state in the case of inductance mismatch. In this paper, a fast response robust deadbeat predictive current control (FRRDBPCC) method is proposed for surface mounted permanent magnet synchronous motor (SPMSM). Firstly, the current tracking error caused by inductance mismatch during transient state is analyzed in detail. Then, an extended state observer (ESO) is proposed to estimate the lumped disturbance caused by parameter mismatch. Based on discrete time ESO, the predicted currents are used to replace the sampled currents to compensate for one-step delay caused by calculation and sampling. Furthermore, an online inductance identification algorithm and a modified prediction model are proposed. The dq-axis currents can be completely decoupled by updating the inductance in the modified prediction model online, ensuring that the current can track the reference value in two control periods. The proposed method improves robustness against parameter mismatch and guarantees dynamic response performance simultaneously. The experimental results verify the effectiveness of the proposed method.

Generalized Proportional Integral Observer Based Robust Finite Control Set Predictive Current Control for Induction Motor Systems with Time-Varying Disturbances.

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

Predictive Current Control for Seven-Phase Induction Motor Based on the Optimal Operating Time of Four-Dimensional Vector

Speed Control For A Permanent Magnet Synchronous Motor With An Adaptive Self-Tuning Uncertainties Observer

An Adaptive Speed Control Method for Permanent Magnet Synchronous Motors

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

A Robust Deadbeat Predictive Current Control Method for IPMSM

Predictive Current Control for Induction Motor Using Online Optimization Algorithm with Constrains

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

Robust Predictive Current Control With Parallel Compensation Terms Against Multi-Parameter Mismatches for PMSMs

Prediction Error Analysis of Finite-Control-Set Model Predictive Current Control for IPMSMs

Predictive Torque Control of Induction Motor Based on a Robust Integral Sliding Mode Observer

An Offset‐free Robust Model Predictive Control with Incremental Model and Improved Current Observer for Induction Motor

An Incremental Deadbeat Predictive Current Control Method for PMSM with Low Sensitivity to Parameter Variation

Improved Finite Control Set Model Predictive Current Control for Permanent Magnet Synchronous Motor with Sliding Mode Observer

A robust offset free model predictive current control for induction motor based on incremental model and incremental current observer

Robust Predictive Current Control of Hybrid-Excited Axial Flux-Switching PM Motor Based on Multiple-Resolution Parameter Identification

Model Predictive Current Control of Permanent Magnet Synchronous Motor Based on Sliding Mode Observer with Enhanced Current and Speed Tracking Ability Under Disturbance