Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Design Principles of a Phase-Shift Modular Slotless Tubular Permanent Magnet Linear Synchronous Motor with Three Sectional Primaries and Analysis of Its Detent Force.

Detent Force Fast Optimization Method of Modular Permanent-Magnet Linear Synchronous Motors

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Performance Analysis of DC-Biased Modular Linear Variable Flux Reluctance Machines

Sectional Combinations of the Modular Tubular Permanent Magnet Linear Motor and the Optimization Design

Detent-Force Analysis and Reduction of Modular Permanent-Magnet Linear Synchronous Motors with Non-overlapping Windings

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Design principle of a 16‐pole 18‐slot two‐sectional modular permanent magnet linear synchronous motor with optimisation of its end tooth

Analysis of a Novel Linear Doubly Salient Slot Permanent Magnet Motor

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Research on Detent Force Characteristics of Winding Segmented Permanent Magnet Linear Synchronous Motor Based on Analytical Model

Thrust ripple analysis for improved modular tubular permanent magnet synchronous linear motor

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

End Force Modeling and Modular-Secondary Optimization of Long-Secondary Permanent Magnet Linear Synchronous Motor

A Novel Detent Force Reduction Method Based on Primary Modular Twice Offset for Alternating Pole Permanent Magnet Linear Motor

Investigation of A Novel Phase-Unit Axial-Modular Permanent Magnet Vernier Machine with Integral-Slot Non-Overlapping Concentrated Windings

Design Method and Performance Evaluation of Modular Multiphase PMSM with Hybrid Single/Double Layer Fractional-Slot Concentrated Winding

A Method to Segregate Detent Force Components in Permanent-Magnet Flux-Switching Linear Machines

Design and Optimization of a Novel Permanent Magnet Linear Motor with the Same Number of Poles and Slots