Abstract:This study investigated the impact of diverse Pt–Pd ratios on the activity and performance of DOC. A range of Pt–Pd catalysts with different Pt–Pd ratios and monometallic Pd and Pt catalysts on Al 2 O 3 support were evaluated systematically. 0.5%wt PGM was used to avoid the high catalyst costs. The light-off temperatures and conversion efficiencies of CO, NO, and C 3 H 6 were investigated under simulated diesel exhaust conditions. Several scientific techniques were used to characterize the catalysts, such as XRD, XPS, H 2 -TPR, and CO 2 TPD. The results demonstrated that using bimetallic Pt–Pd catalysts on Al 2 O 3 support significantly improved light-off temperatures and conversion efficiency than monometallic Pt and Pd catalysts. The order of light-off temperatures and CO and C 3 H 6 conversions was: 0.4Pt0.1Pd < 0.3Pt0.2Pd < 0.2Pt0.3Pd < 0.1Pt0.4Pd < 0.5Pd < 0.5Pt. The synergistic enhancement of catalytic activity can be ascribed to the coexistence of active sites for Pt and Pd. 0.4Pt0.1Pd bimetallic catalyst showed best activity and stability in conversion of CO and C 3 H 6 among all catalysts. As a result of the competitive adsorption of C 3 H 6 and CO on Pt surface, which restricts the availability of adsorbed oxygen, the monometallic Pt/Al 2 O 3 catalyst demonstrated high light-off temperatures and slow CO and C 3 H 6 conversion rates. However, the Pd/Al 2 O 3 catalyst showed very stable conversion efficiency, demonstrating metallic Pd's higher stability than Pt/Al 2 O 3 . Results demonstrated that Pt can be prudently incorporated into Pd-catalysts to improve their catalytic activity. It is noteworthy that the optimal Pt to Pd ratio plays a vital role in balancing activity and stability. The careful use of Pt-modified Pt–Pd bimetallic catalysts holds promise for achieving desired emissions conversion conditions. For instance, the 0.4Pt0.1Pd bimetallic catalysts exhibited superior activity and stability in the conversion of CO and C 3 H 6 compared to other bimetallic catalysts. Pt loading above a specific amount may reduce activity due to Pt and Pd active site overlap and saturation.

A Novel Catalyst Pt/CoAl 2 O 4 /Al 2 O 3 for Combination CO 2 Reforming and Partial Oxidation of CH 4

A Novel Catalyst Pt/CoAl<sub>2</sub>O<sub>4</sub>/Al<sub>2</sub>O<sub>3</sub> for Combination CO<sub>2</sub> Reforming and Partial Oxidation of CH<sub>4</sub>

Reforming of Methane with Oxygen and Carbon Dioxide to Produce Syngas over A Novel Pt/Coal2o4/Al2o3 Catalyst

Catalytic Performance and Characterization of Pt‐Co/Al2O3 Catalysts for CO2 Reforming of CH4 to Synthesis Gas

Enhanced CH4 Production from CO2 Hydrogenation on Γ-Alooh-supported Cobalt Catalyst with Abundant Surface Coordination Unsaturated Oxygen Atoms

Supported Cobalt Catalyst Promoted by Noble Metals for CH4/CO2 Reforming to SyngasⅠ.Preparation Conditions and Performance of Pt-Co/Al2O3 Catalyst

Pt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3 Catalysts for CO Oxidation

Pt3 Co Octapods As Superior Catalysts of CO2 Hydrogenation.

Aqueous-phase reforming of methanol to hydrogen over CoAl oxide-supported Pt catalyst

Study of Partial Oxidation and CO2 Reforming of Methane on Co Based Catalysts

Synthesis, Characterization, and Catalytic Evaluation of Co 3 O 4 /Γ-Al 2 O 3 As Methane Combustion Catalysts: Significance of Co Species and the Redox Cycle

Dry Reforming of Methane over CeO2-supported Pt-Co Catalysts with Enhanced Activity

Investigation of CH<sub>4</sub> Reforming with CO<sub>2</sub> on Meso-Porous Al<sub>2</sub>O<sub>3</sub>-Supported Ni Catalyst

Optimizing the Synergy Between Alloy and Alloy-Oxide Interface for CO Oxidation in Bimetallic Catalysts.

Optimizing Pt/Pd Ratios for Enhanced Low-Temperature Catalytic Oxidation of CO and C3H6 on Al2O3 Support

Investigation of CH 4 Reforming with CO 2 on Meso-Porous Al 2 O 3 -Supported Ni Catalyst

A Novel KCaNi/α-Al<sub>2</sub>O<sub>3</sub> Catalyst for CH<sub>4</sub> Reforming with CO<sub>2</sub>

Carbon Dioxide Reforming of Methane over Cobalt‐Nickel Bimetal‐Doped Ordered Mesoporous Alumina Catalysts with Advanced Catalytic Performances

Effects of modifying Ni/Al2O3 catalyst with cobalt on the reforming of CH4 with CO2 and cracking of CH4 reactions

Sensitivity of the properties and performance of Co catalyst to the nature of support for CO2 reforming of CH4

Partial oxidation of methane to synthesis gas over Co/Ca/Al2O3 catalysts