Abstract:Two kinds of adsorbates—L-ascorbic acid and NaOH were used separately to investigate the effects of adsorbate distribution between ethanol bulk phase and the phase of water-rich layer adsorbed by the surface of SiO2 particles on the preparation of silver nanoparticles on SiO2 particles. When the adsorbate L-ascorbic acid was used, L-ascorbic distributes mainly in the ethanol bulk phase and thus the Ag particle generating reaction will take place in the ethanol bulk phase with the generated Ag particle size of about 18 nm. When the adsorbate NaOH was used, NaOH distributes mainly in the phase of water-rich layer adsorbed on the surface of SiO2 particles and thus the Ag particles generate in the water-rich adsorption layer with particle size of only about 5.4 nm. Since the NaOH concentration effects its distribution between the two phases of ethanol bulk phase and water-rich adsorption layer, the further experiments with changing NaOH concentration in the reaction system from 0.0170 to 0.404 g·L-1 were conducted. Results show that when concentration of NaOH in the system was increased from 0.0170 to 0.135 g·L-1, the NaOH concentration in the water-rich adsorption layer increases with the increase of NaOH concentration in the system gradually, which causes the generation of Ag grains gradually centralizes in the adsorption layer with the grain size decreases from 8 nm to 5 nm, and the Ag particles generated cover the SiO2 more uniformly. When NaOH concentration in the system was increased from 0.135 to 0.404 g·L-1, the amount of NaOH in the system is over the maximum NaOH capacity that can be contained in the water-rich adsorption layer and thus the NaOH concentration in ethanol bulk phase will increase to the limit, above which, the Ag generating reaction rate in it will accelerate more quickly than that in the water-rich adsorption layer, which causes the main generation zone of silver nanoparticles moves from water-rich adsorption layer to ethanol bulk phase gradually, and at the same time, the generated Ag grain size will increase from 5 nm to 12 nm.

Importance of Cations and Anions from Control Agents in the Synthesis of Silver Nanowires by Polyol Method

Influence of adsorption of reactants on preparation of silver nanoparticles by adsorption phase synthesis

High-Concentration Preparation Of Silver Nanowires: Restraining In Situ Nitric Acidic Etching By Steel-Assisted Polyol Method

Innovative Multiphase Ultrasonic-Assisted Method for High-Purity, Stable, and Cost-Effective Copper Nanowire Synthesis

Study On The Synthesis Of Silver Nanowires With Adjustable Diameters Through The Polyol Process

Morphology and Composition Controlled Synthesis of Flower-Like Silver Nanostructures.

Synthesis of AgNWs Using Copper Bromide As Stabilizing Agent and Oxygen Scavenger and Their Application in Conductive Thin Films

Controlling Yield and Morphology for Gold Nanorods in a Seed-Mediated Synthesis Method for Cell Imaging

Green Synthesis of Silver Nanoparticles with High Antimicrobial Activity and Low Cytotoxicity Using Catechol-Conjugated Chitosan

Controlling Synthesis of Silver Nanowires and Dendrites in Mixed Surfactant Solutions

A Simple and Effective Route for the Synthesis of Crystalline Silver Nanorods and Nanowires

Glycerol and Water Mediated Synthesis of Silver Nanowires in the Presence of Cobalt Chloride As Growth Promoting Additive

Synthesis and Characterizing of High Aspect Ratio Silver Nanowires by Polyol Process

Effect of Interphase Distribution of Reactants in Binary Liquids on Preparation of Silver Nanoparticles on Silica Particles

Preparation of Silver Nanorods by Electrochemical Methods

Separating Nucleation from Growth for High-Yield Synthesis of Thin Silver Nanowires

Heterogeneous nucleation optimization from AgCl and reduction control in ethylene glycol for fast and reproducible synthesis of silver nanowires

PVP-assisted sonoelectrochemical growth of silver nanostructures with various shapes

Great Influence of Anions for Controllable Synthesis of CeO2Nanostructures: from Nanorods to Nanocubes

The influence of seeding conditions and shielding gas atmosphere on the synthesis of silver nanowires through the polyol process

The role of tannic acid and sodium citrate in the synthesis of silver nanoparticles