Abstract:Thin-ply composite failure modes also significantly differ from conventional ply composite failure modes, with the final failure mechanism switching from irregular progressive failure to direct fracture characterized by a uniform fracture with the reduction of the ply thickness. When open holes and bolt joints are involved, thin-ply-laminated composites exhibit more complex stress states, damage evolution, and failure modes. Compared to the experimental study of thin-ply-laminated composite-bolted joints, there are few reports about numerical analysis. In order to understand the damage evolution and failure mechanism of thin-ply-laminated composites jointed by single-lap bolt, a progressive damage model based on three-dimensional (3D) LaRC failure criterion combined with cohesive element is constructed. Through an energy-based damage evolution method, this model can capture some significant mechanical characteristics in thin-ply-laminated structures, such as the in situ effect, delamination inhibition, and fiber compressive kinking failure. The comparisons between the numerical predictions and experimental observations are made to verify the accuracy of the proposed model. It is found that the predicted stress-displacement curves, failure modes, damage morphologies, etc., are consistent with the experimental results, indicating that the presented progressive damage analysis method displays excellent accuracy. The predicted stress at the onset of delamination is 50% higher than that of the conventional thick materials, which is also consistent with experimental results. Moreover, the numerical model provides evidence that the microstructure of thin-ply-laminated composite performs better in uniformity, which is more conducive to inhibiting the intra-layer damage and the expansion of delamination damage between layers. This study on the damage inhibition mechanism of thin-ply provides a potential analytical tool for evaluating damage tolerance and bearing capabilities in thin-ply-laminated composite-bolted joints.

Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

An interlaminar damage shell model for typical composite structures

Prediction of Load-Bearing Capacity of Composite Parts with Low-Velocity Impact Damage: Identification of Intra- and Inter-Ply Constitutive Models

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Three-dimensional progressive damage models for cohesively bonded composite π joint

Development and experimental verification of an advanced 3D elastoplastic progressive damage model for composite materials

A New Three-Dimensional Progressive Damage Model for Fiber-Reinforced Polymer Laminates and Its Applications to Large Open-Hole Panels

Continuum damage mechanics based failure prediction and damage assessment in laminated composite structures

Low-velocity impact responses of the stiffened composite laminated plates based on the progressive failure model and the layerwise/solid-elements method

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

A novel aircraft energy absorption strut system with corrugated composite plate to improve crashworthiness

A Progressive Damage Model for unidirectional Fibre Reinforced Composites with Application to Impact and Penetration Simulation

Analytical modeling and analysis of the low-velocity penetration and non-penetration behaviors of fiber-reinforced composite cylindrical shells based on critical impact velocity criterion

Progressive damage analysis of green composite laminates subjected to in-plane crashworthiness

A computational model for the simulation of dynamic fracture in laminated composite plates

A new rate-dependent unidirectional composite model – Application to panels subjected to underwater blast

An Auto-Generated Geometry-Based Discrete Finite Element Model for Damage Evolution in Composite Laminates with Arbitrary Stacking Sequence

Numerical Investigation into Using Coarse Meshes to Predict Damage Behaviors of Laminated Composites Subjected to Low-Velocity Impact