Abstract:In this thesis, fiber optical ray theory and mode coupling theory are used to analyse the transfer characteristics of fiber optical couplers. For light transmission in telecom optical fibers, the variations of mode numbers and mode field diameter (MFD) are simulated. The transferred and coupled power characteristics of fiber couplers are also simulated. Using the simulation results, some etched couplers, micro optical components, and side-polished fiber couplers are designed and fabricated. In order to keep the fiber characteristics unchanged, the work is focused on the process of making fiber couplers at room temperature. We used two methods of fabrications, etching fiber and side-polishing fiber to fabricate 2x2 etched fiber couplers and side-polished fiber couplers. Couplers of side-polished fiber are also fabricated. Coupling and structures of the fabricated devices were examined using SEM and microscopic pictures. Also, in this work, it was tried to fabricate couplers fibers with etched period ditches, however, due to the difficulties of matching the fibers the attempt is failed. Star couplers and x-couplers in silicon V-grooves, silicon, and in glass substrates are fabricated. In order to couple two polished fibers, a work stage for fiber coupler is designed, which has a coarse horizontal X-Y stage and a vertical Z coarse stage, and a small fine XYZ stage is used to adjust the sample in om level. The structures of all the devices were characterized using scanning electron or optical microscopes.

Optimization of polishing parameters for optical coupler based on side-polished photonic crystal fiber

Optimization Of Polished Angle For Optical Coupler Based On Side-Polished Photonic Crystal Fiber

Optimization of the residual radius of the side-polished photonic crystal fiber coupler

Numerical Analysis of Optical Propagation Characteristics of Side-Polished Photonics Crystal Fiber

An Optimized Design of a Dual-Core Photonic Crystal Fiber Coupler

A fused side-adhered optical fiber coupler based on side-polished fibers

Design and Optimization of A Novel Broadband and Polarization-Insensitive Dual-Core Photonic Crystal Fiber Coupler over the Whole Optical Communication Band

Research on Coupler of Single Mode Fiber with Photonic Crystal Fiber

Design of Single-Polarization Single-Mode Coupler Based on Dual-Core Photonic Crystal Fiber

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Design of a single-polarization single-mode photonic crystal fiber double-core coupler

Optical Side-Polished Fiber Coupler : Design and Fabrication

Ultrabroadband Polarization-Insensitive Coupler Based on Dual-Core Photonic Crystal Fiber

Design and Fabrication of High Efficiency Power Coupler Between Different Photonic Crystal Waveguides

Photonic Crystal Fibers with Broadband Nearly-Zero Ultra-Flattened Chromatic Dispersion and Improved Effective Mode Area

Control of the Fabrication Parameters During the Fabrication of Photonic Crystal Fibers

Broadband Single-Polarization Single-Mode Photonic Crystal Fiber Coupler

Design of Twin Core Photonic Crystal Fiber Coupler Using WDM

Design of Ultrawideband Single-Polarization Single-Mode Photonic Crystal Fiber with Ultraflattened Dispersion

Bending dual-core photonic crystal fiber coupler

Design of dispersion compensating photonic crystal fibers