Abstract:To achieve the high dispersion of SiO2 nanoparticles in polyurethane acrylate resin, the titanate coupling agent, PN-102, was used as the surface modifier to prepare the modified SiO2 nanoparticles (Si-PN102-5) with small particle size and good dispersion ability in PUA-6 resin. Accordingly, hydrophilic SiO2 (Si-380) and hydrophobic SiO2 (Si-115) were introduced into PUA-6 resin to prepare the corresponding composite coatings, so as to investigate the effects of SiO2 nanoparticles modified with different surface modifiers on the properties of PUA / SiO2 composite coatings. The properties of PUA / SiO2 composite coatings were characterized by the tests of FTIR, AFM, SEM, DMA, TG and so on. The FT-IR and XPS results show that PN-102 had functionalized the SiPN102-5 particle surface successfully. The TEM test displays that the particle size of SiO2 was almost unchanged before and after modification, maintaining at about 20-30 nm. The SEM, DMA and tensile test reveal that Si-PN102-5 not only blocks the interaction and accumulation of nanoparticles, but also enhances the interface interaction with polymer chains through chain entanglement, which endows Si-PN102-5-5% composite coatings with highest mechanical strength among the other prepared coatings, reaching to 11.0 +/- 0.1 MPa in tensile strength and 9.4 +/- 3.0% in elongation at break. The pencil hardness of the prepared Si-PN102-5-5% composite coating could reach to 5H which is higher than the commercial PUA-6 based coating, and it also displayed good adhesion (4B) and flexibility (3 mm). The TG results show that all of prepared composite coatings display good thermal stability with a decomposition temperature of higher than 250 degrees C.

Synthesis, Characterization and Performance of Nanosized Bi0.1Sn0.9O2–WPU Organic–inorganic Hybrid Coatings

Preparation and Performance of Nano-ITO/WPU Organic-Inorganic Hybrid Heat Insulation Materials

Polyhydroxyurethanes (PHUs) Derived from Diphenolic Acid and Carbon Dioxide and Their Application in Solvent- and Water-Borne PHU Coatings

Solvent-free Zirconia Nanofluids/silica Single-Layer Multifunctional Hybrid Coatings

Preparation of functional ZnO nanoparticles and their application as UV photosensitizer and reinforcing agent for waterborne polyurethane acrylate composite coating

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Synthesis and Characterization of Hybrid Nanocomposites for Hard Coating Applications

Preparation of Surface-Modified Nano Zinc Sulfide/Polyurethane Inorganic-Organic Transparent Coating and Its Application in Resin Lens

The functionalization of film materials for grafting WPU with polystyrene hollow microspheres

Synthesis and Characterization of Crosslinked Castor Oil-Based Polyurethane Nanocomposites Based on Novel Silane-Modified Isocyanate and Their Potential Application in Heat Insulating Coating

In Situ Preparation and Properties of Waterborne Polyurethane/edge-Isocyanated Hexagonal Boron Nitride Composite Dispersions

A novel waterborne polyurethane coating modified by highly dispersed nano‐boron carbide particles

Preparation and properties of water‐borne polyurethane‐sodium lignosulfonate/nano‐calcium carbonate composites

Cs0.32WO3/PMMA nanocomposite via in-situ polymerization for energy saving windows

Preparation and properties of UV-curable polymer/nanosized indium-doped tin oxide (ITO) nanocomposite coatings

Preparation of Transparent, Hard Thermochromic Polysiloxane/tungsten-Doped Vanadium Dioxide Nanocomposite Coatings at Ambient Temperature

Effect of Highly Dispersible Zirconia Nanoparticles on the Properties of UV-curable Poly(urethane-Acrylate) Coatings

Synthesis of TiO2–SiO2/waterborne Polyurethane Hybrid with Amino-Siloxane Terminated Via a Sol–gel Process

Effect of Antimony Doped Tin Oxide on Behaviors of Waterborne Polyurethane Acrylate Nanocomposite Coatings

Preparation,Structure and Performance of Organic-Inorganic Nano Hybrid Coatings

Preparation and Properties of UV-curable Polyurethane Acrylate/sio2 Composite Hard Coatings