Abstract:Titanium matrix composites(TMCs) have shown great potential for weight reduction in aerospace applications. However, hard ceramic reinforcements make the superplastic forming of TMCs hard to be achieved. In the present work, the microstructure of TiBw/near-alpha Ti composite was manipulated to achieve better deformability. Two different preprocessing routes were designed to obtain composites of equiaxed microstructure with the grain size of-3 mu m, and bimodal microstructure with the grain size of-8 mu m. Hot tensile test was carried out for the fabricated composites at 700 degrees C-800 degrees C and strain rates of 0.003 s(-1) - 0.0003 s(-1). The results showed that the deformability of the TiBw/near-alpha Ti composites was improved significantly, with a maximum elongation of 348% for the composite with equiaxed microstructure, and 161% for the composite with bimodal microstructure. The deformation was determined to be dominated by dislocation movement under temperatures below 800 degrees C and grain boundary sliding (GBS) dominated at 800 degrees C. alpha/beta lath in bimodal microstructure was observed to hinder GBS while prompting dynamic recrystallization (DRX), which was consistence with the higher activation energy of the composite with bimodal microstructure (391 kJ/mol) compared to that of the composite with equiaxed microstructure (310 kJ/mol). Compared to reports in literatures, the deformation temperature of composites prepared in the present work was 50 degrees C lower than that fabricated by other methods, attributed to the tailored fine microstructure.

Modeling of effects of thermomechanical processing on elevated-temperature mechanical properties of in situ (TiB + TiC)/Ti-1100 composite

The Mechanical Behavior Dependence on the TiB Whisker Realignment During Hot-Working in Titanium Matrix Composites

Thermomechanical Processing of (tib + TiC)/Ti Matrix Composites and Effects on Microstructure and Tensile Properties

Microstructure and Mechanical Properties Variation of Tib/Ti Matrix Composite by Thermo-Mechanical Processing in Beta Phase Field

Thermomechanical Processing of a Near-α Ti Matrix Composite Reinforced by TiBw

Effect of TiB Whiskers Orientation on Mechanical Properties in an In Situ TiB/Ti-1100 Composite

Effect of TiB Whiskers Orientation on Mechanical Properties in an <I>In Situ</I> TiB/Ti-1100 Composite

Mechanical Properties and Strengthening Effects of in Situ (Tib+tic)/ti-1100 Composite at Elevated Temperatures

Improved Mechanical Properties in Titanium Matrix Composites: Controllable TiBw Distribution by Thermal Deformation Process

Significantly Enhanced Superplasticity of TiBw/near-α Ti Composite: Microstructure Tailoring and Deformation Mechanisms

High-temperature Mechanical Properties and Strengthening Mechanism of In-situ (TiB+ TiC)/Ti-1100 Composite

Strengthening Effects of Tic Particles and Microstructure Refinement in in Situ Tic-Reinforced Ti Matrix Composites

Achieving Highly Variable Mechanical Behaviors in TiBw/TA15(Si) Composite by Microstructure Manipulation

Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting

Multiscale crystal plasticity finite element simulations of the deformation inhomogeneity of TiBw/TA15 composites with network-structured during hot rolling

Effect of Forging Temperature on Microstructure and Mechanical Properties of <i>in Situ</I> (tib+tic)/ti Composites

Mechanical Properties and Strengthening Mechanisms of in Situ (Tib+tic)/ti-1100 Composite at Elevated Temperature

Superior superplasticity and multiple accommodation mechanisms in TiB reinforced near-α titanium matrix composites

Microstructure and tensile properties of in situ synthesized (TiBw + TiCp)/Ti6242 composites

The microstructure evolution and the effect of grain size, temperature, and TiBw on the deformation mechanism of TiBw/TA15 composites during high temperature deformation

Effect of Forging on Microstruture and Mechanical Properties of in Situ TiBw/Ti Composite