Abstract:The effects of Ce addition(310 ppm and 1500 ppm)on the microstructure,texture and properties of ultrahigh-purity copper(99.99999％)were systematically studied using scanning electron microscopy(SEM),transmission electron microscopy(TEM)and electron backscattered diffraction(EBSD)analyses,combined with the microhardness and conductivity tests.Regarding the microstructure of the as-cast and as-extruded samples,the addition of Ce refines the grain size of the ultrahigh-purity copper and the refinement effect of 310Ce alloy is greater than that of 1500Ce alloy.This is due to the stronger component supercooling and the accelerated recrystallization caused by lower Ce content.In addition,Ce can react with Cu to form the Cu-Ce eutectic phases,which are deformable during the hot deformation.Furthermore,the added Ce can weaken the texture,showing a variation of brass recrystallization(BR),rotated cube,copper and S texture components,which depends on the recrystallization,the particle stimulated nucleation(PSN)as well as the stacking fault energy(SFE).Most remarkably,the introduction of Ce enhances the hardness of the ultrahigh-purity copper without obviously reducing its conductivity.The major {111} orientations and the stress distributions are responsible for such a superior conductivity of the Ce-containing alloys.

Effect of Ce Addition on Microstructures and Mechanical Properties of A380 Aluminum Alloy Prepared by Squeeze-Casting

Effect of Cerium on Microstructure, Texture and Properties of Ultrahigh-Purity Copper

Effect of Ce Content on the Microstructure and Mechanical Properties of Squeeze-Cast Al–5Mg-2.2Si-0.6Mn Alloys

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy

Effect of Ce content on microstructure and mechanical properties of Al-Si alloy

Effect of minor cerium additions on microstructure and mechanical properties of cast Al – Cu – Mg – Ag alloy

Influences of Ce Addition on the Microstructures and Mechanical Properties of 2519a Aluminum Alloy Plate

Effects of Cerium on the Microstructure and Mechanical Properties of Mg–20Zn–8Al Alloy

Influence of cerium on microstructures and mechanical properties of Al-Zn-Mg-Cu alloys

Fatigue and fracture mechanisms of aluminum-lithium alloy containing cerium

Effect of Ce on Castability, Mechanical Properties and Electric Conductivity of Commercial Purity Aluminum

Effect of Ce addition on microstructure of Al 20Cu 2Mn 3 twin phase in an Al-Cu-Mn casting alloy

Effect of Ce on structures and tensile properties of high-strength Al-Cu-Li alloy

Microstructure and Mechanical Properties of Ti44Al6Nb Alloys with Different Cerium Contents

Effect of Rare Earth Ce Addition on the Microstructure and Mechanical Properties of an Al–Cu–Mg–Ag Alloy

Effect of Ce Content on the Microstructure and Mechanical Properties of Al-Cu-Li Alloy

The Effect of Addition of Cerium on the Grain Refinement of Mg–3Al–1Zn Cast Alloy

Effect of rare earth Ce addition on microstructure and mechanical properties of titanium alloy Ti-6Al-4V

Effect of Cerium on Microstructures and Mechanical Properties of Az61 Wrought Magnesium Alloy

Effects of Cerium on As-Cast Microstructure and Mechanical Properties of Mg–3Sn–2Ca Magnesium Alloy

Effect of Ce Content on the Microstructure of Semisolid Mg-10Al Alloy