Abstract:Fuel cell is one of the most promising clean energy and alternative energy technologies due to its advantages of low emissions and high efficiency. One application of the fuel cell technology is onboard auxiliary power units (APUs) for power generation in aircrafts, ships, and automobiles. In order to supply hydrogen or syngas for the fuel cell APUs, onboard fuel processing technology was proposed to convert hydrocarbon fuels into syngas through reforming reactions. Two major tasks need to be completed in onboard fuel processing technology. Firstly sulfur compounds have to be removed from hydrocarbon fuels because sulfur can cause reforming catalyst deactivation and fuel cell electrodes poisoning problems. Secondly hydrogen and carbon monoxide shall be produced by reforming of hydrocarbon fuels at a high energy conversion efficiency. This dissertation focused on onboard fuel processing of Jet-A fuel to produce hydrogen and syngas for solid oxide fuel cell (SOFC) APUs. Jet-A fuel was studied because it is the logistic fuel commonly used for civilian airplanes and military heavy duty trucks. Ultra-deep adsorptive desulfurization of Jet-A fuel from over 1,000 ppmw to below 50 ppmw, and autothermal reforming of n-dodecane as a Jet-A fuel surrogate as well as the real desulfurized Jet-A fuel to produce syngas have been systematically investigated in the present study. For the adsorptive desulfurization of Jet-A fuel, a novel NiO-CeO 2/Al2O3-SiO2 adsorbent was proposed and prepared in-house for experimental tests. The sulfur adsorption kinetic characteristic and isotherm at equilibrium were studied in batch tests, and the dynamic desulfurization performance of the adsorbent was investigated in fixed bed tests. Fixed bed tests operation conditions including liquid hourly space velocity (LHSV), adsorbent particle size, and fixed bed dimensions were optimized to achieve the highest adsorbent sulfur adsorption capacity. For the reforming of Jet-A fuel, autothermal reforming (ATR) method was employed and a bimetallic NiO-Rh catalyst was synthesized for the ATR reactions. A lab-scale 2.5 kWt autothermal reforming system including the reformer and balance-of-plant was designed, fabricated, integrated and tested. The reforming system performances at various operation conditions were compared. Reformer operation temperature, steam to carbon ratio and oxygen to carbon ratio, as well as pre-heating temperatures for fuel, air and steam were optimized based on system energy conversion efficiency, H2 selectivity and COx selectivity. ProQuest Subject Headings: Mechanical engineering, Chemical engineering, Materials science. © Citation reproduced with permission of ProQuest LLC.

PRODUCING HYDROGEN FROM JET-A FUEL IN A REACTOR WITH INTEGRATED AUTOTHERMAL REFORMING AND WATER-GAS SHIFT

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Hydrogen Production Via Catalytic Autothermal Reforming of Desulfurized Jet-A Fuel

Autothermal reforming of n -dodecane and desulfurized Jet-A fuel for producing hydrogen-rich syngas

Desulfurization and autothermal reforming of Jet-A fuel to produce syngas for onboard solid oxide fuel cell applications

Hydrogen Production Of A Heavy Hydrocarbon Fuel Autothermal Reformer On Nio-Rh Based Monolithic Catalysts

Hydrogen producing from propane autothermal reforming

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Computational Fluid Dynamics Modeling of Thermally Integrated Microchannel Reforming Reactors for Hydrogen Production

Hydrogen-rich gas with low-level CO produced with autothermal methanol reforming providing a real-time supply used to drive a kW-scale PEMFC system

Experimental Study of the Design and Performance Optimisation of a Self-Heating Methanol On-Board Reforming Reactor for Hydrogen Production

Design and optimization of hydrogen production system model for dimethyl ether self-heating steam reforming

Steam Reforming of a Diesel Surrogate to Produce Hydrogen-Rich Syngas for Solid Oxide Fuel Cells

Operation Conditions Optimization of Hydrogen Production by Propane Autothermal Reforming for PEMFC Application

A Study on the Integrated Process for Hydrogen-rich Gas Production from Biomass

Fuel Adaptability Study of a Lab-Scale 2.5 Kwth Autothermal Reformer

Study of an Autothermal-Equilibrium Metal Hydride Reactor by Reaction Heat Recovery As Hydrogen Source for the Application of Fuel Cell Power System

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Small-scale reforming of diesel and jet fuels to make hydrogen and syngas for fuel cells: A review

STEAM REFORMING BIO-OIL TO PRODUCE HYDROGEN IN A FLUIDIZED BED REACTOR