Abstract:Direct internal reforming solid oxide fuel cells (DIR-SOFCs) are economically viable devices for power generation, while their reliability requires further improvement. Advanced process control can effectively facilitate the long-term operation of SOFCs with high efficiency and safety. DIR-SOFCs exhibit complex coupling effect and a high degree of nonlinearity, making it worthwhile to embed high-quality dynamic models including spatial distributions into nonlinear model predictive control (NMPC). A two-layer control architecture aiming for rapid load tracking and thermal management with high economic efficiency is designed for planar DIR-SOFCs, containing a set point optimizer and an NMPC controller based on the distributed parameter model expressed by partial differential–algebraic equations (PDAE). PDAE-constrained dynamic optimization problems are solved in the NMPC controller to seek optimal control strategies, considering safety constraints about the maximum temperature gradient and physical constraints of actuators. The high-fidelity one-dimensional PDAE model is validated through steady and dynamic simulations, and the optimal steady-state distributions are analyzed under three power demands. Behaviors of the closed-loop system under power demand step-up and step-down scenarios are investigated to demonstrate the effectiveness of the designed control scheme. The proposed NMPC controller can efficiently realize rapid load tracking, maintain good thermal management, and reduce the transition time, with minor steady-state errors and acceptable real-time performance.

Design and Implementation of Hybrid Modeling and PFC for Oxygen Content Regulation in a Coke Furnace.

A Simplified Linear Iterative Predictive Functional Control Approach for Chamber Pressure of Industrial Coke Furnace

Combining predictive functional control and PID for liquid level of coking furnace

Dynamic Modeling And Nonlinear Predictive Control Based On Partitioned Model And Nonlinear Optimization

Application of Predictive Functional Control for Oxygen Content in Delayed Coking Furnace

Modeling and nonlinear predictive functional control of liquid level in a coke fractionation tower

Support vector machine based predictive functional control design for output temperature of coking furnace

Predictive Functional Controller with A Similar Proportional Integral Optimal Regulator Structure: Comparison with Traditional Predictive Functional Controller and Application to Heavy Oil Coking Equipment

Design and implementation of an improved linear quadratic regulation control for oxygen content in a coke furnace

Real-Time Implementation of Improved State-Space MPC for Air Supply in a Coke Furnace

Temperature Control of Industrial Coke Furnace Using Novel State Space Model Predictive Control

Two-timescale Nonlinear Model Predictive Control for Flexible Operation of Coal-Fired Power Plant with Post Combustion CO2 2 Capture System

Multivariable Decoupling Predictive Functional Control with Non-Zero–pole Cancellation and State Weighting: Application on Chamber Pressure in a Coke Furnace

Data-driven Modelling and Fuzzy Multiple-Model Predictive Control of Oxygen Content in Coal-Fired Power Plant

Improved Fuzzy PID Controller Design Using Predictive Functional Control Structure

Nonlinear model predictive control of direct internal reforming solid oxide fuel cells via PDAE-constrained dynamic optimization

Improved PI controller based on predictive functional control for liquid level regulation in a coke fractionation tower

Design of Dynamic Matrix Control Based PID for Residual Oil Outlet Temperature in a Coke Furnace

Predictive Functional Control of Chamber Pressure of Coking Furnace

Control of Oxygen Excess Ratio for a PEMFC Air Supply System by Intelligent PID Methods

Adaptive State Feedback Predictive Control and Expert Control for A Delayed Coking Furnace