Abstract:Selective catalytic reduction (SCR) flue gas denitrification systems are inherently complex, typically embodying characteristics of non-linearity, significant time delays, and susceptibility to multiple disturbances. In the context of coal power units engaging in deep load cycling and rapid frequency adjustment, conventional proportional-integral-derivative (PID) control struggles to meet the demands of effective control. This study introduces a control strategy that incorporates a "state observer + Linear Quadratic Regulator (LQR) state feedback + Improved Quantum Genetic Algorithm (IQGA) optimized PID". Initially, local linear mathematical models of an SCR denitrification system at 340 MW, 450 MW, and 540 MW loads were used to design state observer and LQR state feedback control parameters for each operational condition. At a single load point, the IQGA was employed to optimize the outer loop PID parameters, followed by simulation experiments of load increases and decreases between 340 MW and 540 MW. The results demonstrated that, compared to two other strategies, the proposed approach reduced the overshoot by a minimum of 1.5% and shortened the adjustment time by 31.7% under conditions of step disturbances and internal perturbations. Throughout variable operational conditions, the strategy consistently exhibited minimal output fluctuations, rapid adjustment capabilities, strong disturbance rejection, and robust stability. This algorithm proves to be an effective method for controlling NOx concentrations, offering insights for precise ammonia injection control in future applications.

Design and implementation of an improved linear quadratic regulation control for oxygen content in a coke furnace

A Simplified Linear Iterative Predictive Functional Control Approach for Chamber Pressure of Industrial Coke Furnace

Support vector machine based predictive functional control design for output temperature of coking furnace

A Digital Dual-Mode Lqr Optimal Controller for Boost Converter over A Wide Operation Range

Multiple Model Predictive Control for Oxygen Starvation Prevention of Fuel Cell System

Improved Control Using PFC and Modified Linear Quadratic Regulator for a Kind of Nonlinear Systems

Modeling and nonlinear predictive functional control of liquid level in a coke fractionation tower

Application of Predictive Functional Control for Oxygen Content in Delayed Coking Furnace

Combining predictive functional control and PID for liquid level of coking furnace

Dynamic Modeling And Nonlinear Predictive Control Based On Partitioned Model And Nonlinear Optimization

Improved linear quadratic and proportional control system for improved liquid level system regulation in a coke fractionation tower.

Economic Performance Assessment of Multivariable Model Predictive Control Based on Linear Quadratic Gaussian Benchmark

Predictive Functional Controller with A Similar Proportional Integral Optimal Regulator Structure: Comparison with Traditional Predictive Functional Controller and Application to Heavy Oil Coking Equipment

Real-Time Implementation of Improved State-Space MPC for Air Supply in a Coke Furnace

Temperature Control of Industrial Coke Furnace Using Novel State Space Model Predictive Control

State-Space Predictive-P Control for Liquid Level in an Industrial Coke Fractionation Tower

Optimal PID Control System Design on Aero-engine Using LQR Approach

Application of an Improved State Feedback Control in the Selective Catalytic Reduction Denitrification Systems of Coal Power Units Under Variable Load Conditions

Improved Control Using Extended Non-Minimal State Space MPC and Modified LQR for a Kind of Nonlinear Systems.

A Linear Quadratic Regulation Controller Based on Radial Basis Function Network Approximation

Model Predictive Control of Post-Combustion CO2 Capture System for Coal-Fired Power Plants