Abstract:The advent of 6G wireless networks necessitates a synergistic design approach for sensing, communication, and protection, highlighting the capability of systems to function in transition between wideband transmission, narrowband transmission, and wideband reflection. This study introduces a novel trifunctional active frequency selective surface (TA-FSS) for this scenario. Compared with the conventional structures that can only realize frequency tuning or mode switching, this design has the versatility to switch the bandwidth of the passband and operate in three distinct modes: wideband communication mode with a passband of 18.9% relative bandwidth, narrowband tunable sensing mode with a tunable passband of 3.4% relative bandwidth and 37.9% relative tuning range, and a wideband protection mode with a reflection band from 1 to 5 GHz. First, a novel approach is devised to facilitate the passband width modulation at a consistent frequency through the established equivalent circuit model and verified through a single-polarized TA-FSS prototype. Afterward, based on a quasi-symmetric design methodology, a dual-polarized TA-FSS is achieved with a periodicity of 0.09 lambda and thickness of 0.018 lambda . The dual-polarized TA-FSS is angular stable up to 45(degrees) and polarization insensitive. A physical prototype of the envisioned FSS is constructed for experimental evaluation. The measured results are closely aligned with the theoretical predictions.

Simultaneous optimization of conductive layer, dielectric layer, and fabrication process for optically transparent low-loss frequency selective surfaces

Conjugate Adjoint Gradient-Based Inverse Design Method for Aperiodic Frequency-Selective Surface with Weighted Loss

A Novel Dual-Band Frequency Selective Surface (FSS)

Efficient Simulation of Tunable Graphene-Based Frequency Selective Surfaces (GFSS) with an Improved HIE-FDTD Method

Improved Hybrid Fdtd Method for Studying Tunable Graphene Frequency-Selective Surfaces (gfss) for Thz-Wave Applications

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Four-Mode Switchable Frequency-Selective Surface Featuring Wide-Band and Angular Stability

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Miniaturized Lossy-Layer Scheme For Designing a Frequency Selective Rasorber

A Frequency-Selective Surface Rasorber Based on Four Functional Layers

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Fabrication of the double-layer millimeter wave frequency selective surface by femtosecond laser

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Design of a Multilayered Frequency Selective Surface Absorber for the Suppression of Grating Lobes

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

High-Selectivity Frequency-Selective Rasorber Based on Low-Profile Bandpass Filter

A Novel Miniaturized Dual-band Frequency Selective Surface

A Novel Tunable Frequency Selective Surface Absorber with Dual-Dof for Broadband Applications.

Analysis of the spatial filter of a dielectric multilayer film reflective cutoff filter-combination device

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications