Abstract:Solid oxide fuel cells (SOFCs) are ideally suited for environmentally benign conversion of chemical energy in hydrocarbons to electricity. While medium scale SOFC power systems in the hundreds of kWe have been demonstrated, larger scale application of such systems have been hobbled by still too high cost. In order to bring down the cost of these systems, manufacturing costs have to be decreased while the power densities have to be improved. Achieving these twin goals will require the reduction of operating temperatures of the cells. On a single cell level, the largest source of performance loss at lower operating temperatures occurs in the cathode. Thus many different groups are presently investigating a slew of new cathode materials. While the performance of the new cathode materials are impressive under controlled operating conditions, it is presently not clear whether they will stand up to the rigorous and punishing operating environments of actual fuel cell stacks. In particular the interfacial and bulk stability of the new generation of cathode materials such as strontium doped lanthanum cobaltites, strontium doped lanthanum cobaltites , and lanthanum nickelates when exposed to anodic gases such as carbon dioxide and water vapor is presently unknown. Exposure to at least trace amounts of anodic gases during the lifetime of the stack is a likely occurrence and could arise from back diffusion, pinholes in the electrolyte and/or interconnection, or compromised seals. Thus, it is important to have a clear understanding of the thermodynamic and kinetic stability of both the interfaces and the bulk of the cathode material under exposure to the aforementioned anodic gases. In this paper, we present results from a study that combines electrochemical and x-ray measurements of the impact of carbon dioxide exposure on strontium doped lanthanum cobalt iron oxide (LSCF), as a function of strontium dopant concentration, gas composition, and temperature. These are combined with computational studies of the stability of the LSCF cathode to carbon dioxide exposure. The longer term goal of this study is to identify cathode compositions which have long term stability to exposure to trace anode side gases.

Stability of the SOFC Cathode Material ( Ba , Sr ) ( Co , Fe ) O3 − δ in CO2-Containing Atmospheres

Influence of CO2 on the Cathode Performance and Stability of La1-XSrxCo0.2Fe0.8O3-Î´ in Solid Oxide Fuel Cells

Turning Detrimental Effect into Benefits: Enhanced Oxygen Reduction Reaction Activity of Cobalt-Free Perovskites at Intermediate Temperature via CO2-Induced Surface Activation

Highly CO2-Tolerant Cathode for Intermediate-Temperature Solid Oxide Fuel Cells: Samarium-Doped Ceria-Protected SrCo0.85Ta0.15O3-δ Hybrid

Evaluation of the CO2 Poisoning Effect on a Highly Active Cathode SrSc(0.175)Nb(0.025)Co(0.8)O(3-δ) in the Oxygen Reduction Reaction.

SrCo 0.50 Fe 0.40 Ir 0.10 O 3−δ Decorated with Pd and La 0.8 Sr 0.2 Ga 0.83 Mg 0.17 O 3−δ : A Cleaner Electrode for Intermediate-Temperature Solid Oxide Fuel Cells with Reduced Cobalt Content

Novel SrTixCo1−xO3−δ Cathodes for Low-Temperature Solid Oxide Fuel Cells

The Chemical Evolution of the La0.6Sr0.4CoO3−δ Surface Under SOFC Operating Conditions and Its Implications for Electrochemical Oxygen Exchange Activity

Cobalt-free SrFe0.9Ti0.1O3−δ as a high-performance electrode material for oxygen reduction reaction on doped ceria electrolyte with favorable CO2 tolerance

Antimony-doped Strontium Cobalt Oxide As Promising Cathode for Low-Temperature Solid Oxide Fuel Cell with Excellent Carbon Dioxide Tolerance

Synthesis, characterization and evaluation of PrBaCo2−xFexO5+δ as cathodes for intermediate-temperature solid oxide fuel cells

LaBa0.8Ca0.2Co2O5+δ cathode with superior CO2 resistance and high oxygen reduction activity for intermediate-temperature solid oxide fuel cells

Thermal and Electrical Properties of New Cathode Material Ba[sub 0.5]Sr[sub 0.5]Co[sub 0.8]Fe[sub 0.2]O[sub 3−δ] for Solid Oxide Fuel Cells

Electrocatalytic and operando characterization of state-of-the-art SOFC cathodes for applications at high CO2 concentration in novel clean power production cycles

Effect of Carbon Dioxide on the Cathodic Performance of Solid Oxide Fuel Cells

Development of a Cathodic Material Based on Doped Strontium Cobaltite for Medium Temperature SOFC

A CO2-tolerant La2NiO4+δ-coated PrBa0.5Sr0.5Co1.5Fe0.5O5+δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Performance Degradation of Double-Perovskite PrBaCo2O5+δ Oxygen Electrode in CO2 Containing Atmospheres

Structure, electrical and thermal properties of (Ba 0.5Sr 0.5) 1 - XGd xCo 0.8Fe 0.2O 3-δ perovskite as a solid-oxide fuel cell cathode

Preparation And Characterization Of Ba0.4sr0.6co1-Xfexo3-Delta Cathode Materials

Insight into the structure and functional application of the Sr0.95Ce0.05CoO3-δ cathode for solid oxide fuel cells