Abstract:In this article, a new bidirectional single-stage interleaved totem-pole electrolytic capacitorless ac–dc converter with high-frequency isolation and low components count is proposed. The proposed converter is constructed using nonregulating two-phase interleaved totem-pole converter switched with a fixed 50% duty on the grid side and a full-bridge on the dc-side for active power and dc output regulation. This switching method results in a ripple-free grid current regardless of the magnitude of the input inductances. Consequently, a proper design of input inductance secures soft switching for all switches under wide voltage and load ranges without an auxiliary circuit or resonant tank. Hence, the proposed topology overcomes the reverse recovery issue, thereby enabling the use of Si devices in CCM. Moreover, the current spike around the ac main zero-crossing is avoided in the CCM operation due to small rectified voltage around zero-crossing. Furthermore, the instantaneous powers at the grid side and dc-side are identical since the proposed topology is electrolytic capacitorless with inherent second harmonic ripple current at the dc-side. PFC is inherently performed in the proposed converter without a current shaping control loop, and the phase-shift angle is the only control variable. Hence, the control system is simple and reliable. A 3.3 kW prototype of the proposed converter is built and tested in order to verify the performance and the theoretical claims.

Electrolytic Capacitorless Current-Fed Single-Phase Pulsating DC Link Inverter.

Soft-Switching Single-Stage Current-Fed Full-Bridge Isolated Converter for High Power Ac/Dc Applications

Full-bridge current mode high-frequency link inverters

Soft-Switching Single Stage Isolated Ac-Dc Converter for Single-Phase High Power Pfc Applications

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

Zero-Voltage-Switching Single-Phase Full-Bridge Inverter With Active Power Decoupling

Interleaved Totem-Pole ZVS Converter Operating in CCM for Single-Stage Bidirectional AC–DC Conversion With High-Frequency Isolation

Control and Modulation of a Single-Phase AC/DC Converter with Smooth Bidirectional Mode Switching and Symmetrical Decoupling Voltage Compensation

Integrated-Power-Control-Strategy-Based Electrolytic Capacitor-Less Back-to-Back Converter for Variable Frequency Speed Control System

A single-source switched-capacitor multilevel inverter for magnetic coupling wireless power transfer systems

Single-Stage Isolated Electrolytic Capacitor-Less EV Onboard Charger With Power Decoupling

Single-Phase to Three-Phase Electrolytic Capacitor-Less Dual Inverter-Fed IPMSM for Suppress Torque Pulsation

Current-Fed Phase-Shifted Full-Bridge Converter with Secondary Harmonic Current Reduction for Two-Stage Inverter in Energy Storage System

An Inductorless Triple Boost 13-Level Switched Capacitor Inverter With Reduced Ripple Current

Single-Phase AC–DC Converter With SiC Power Pulsation Buffer for Pulse Load Applications

AC Side Connected-In-Series Modular Quasi-Single-Stage Isolated AC-DC Converter

Three-Phase Step-Up Multilevel Inverter With Self-Balanced Switched-Capacitor

A Composite Soft-Switching Inverter Configuration with Unipolar Pulsewidth Modulation Control.

ANPC Switched-Capacitor 19L Inverter Using SHE PWM for 1-φ HFAC PDS Applications

Current-Fed Isolated Three-Phase Matrix-Type Grid Inverter With Soft-Switching Capability