Abstract:The inverter is the most vulnerable module of photovoltaic (PV) systems. The insulated gate bipolar transistor (IGBT) is the core part of inverters and the root source of PV inverter failures. How to effectively diagnose the IGBT faults is critical for reliability, high efficiency, and safety of PV systems. Recently, deep learning (DL) methods are widely used for fault detection and diagnosis. Different from traditional diagnosis methods, DL methods use deep neural networks which can automatically extract the useful representative features from raw data. However, DL methods require large amounts of data, which leads to the high cost of communication, storage, and computation. To tackle these issues, a data-driven fault detection and diagnosis method for IGBT open-circuit faults based on compressed sensing (CS) and convolutional neural networks (CNN) is proposed in this paper. CS is adopted to compress raw signals, and the optimal value of compression ratio (CR) is determined by considering the trade-off between classification accuracy and model training time. The overlap sampling method is adopted for data segmentation. Meanwhile, overlap sampling can also increase the number of training samples and improve the sample correlation. The compressed signals are segmented and reconstructed into two-dimensional feature maps for model training. Finally, compared with CNN of the same structure, the developed CS-CNN model can compress 85% of data without accuracy loss. The performance comparison with the state-of-the-art networks demonstrates that the test accuracy is 98.68% and the model training time is much shorter than other methods.

Detection of IGBT Degradation in NPC Inverter Based on Infrared Thermography

Thermal Performance Evaluation of 1500-VDC Photovoltaic Inverters under Constant Power Generation Operation

Reliability-Driven Assessment of GaN HEMTs and Si IGBTs in 3L-ANPC PV Inverters

LF-OCT Based Non Destructive Testing for IGBT Module

Open-circuit fault diagnosis of NPC inverter IGBT based on independent component analysis and neural network

Non-Contact Degradation Evaluation for IGBT Modules Using Eddy Current Pulsed Thermography Approach

In Situ Diagnosis for IGBT Chip Failure in Multichip IGBT Modules Based on a Newly Defined Characteristic Parameter Low-Sensitive to Operation Conditions

An Igbt Open-Circuit Fault Diagnosis Method For Grid-Tied T-Type Three-Level Inverters

Diagnosing IGBT Module Degradation by Frequency-domain Heat Flow Analysis

Fault diagnosis for open-circuit faults in NPC inverter based on knowledge-driven and data-driven approaches

Diagnosis for IGBT Open-circuit Faults in Photovoltaic Inverters: A Compressed Sensing and CNN based Method

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

Design,simulation and Analysis of IGCT-based High Power NPC Inverter

Improved Temperature Monitoring and Protection Method of Three-Level NPC Application Based on Half-Bridge IGBT Modules

An Average Model-Based Transistor Open-Circuit Fault Diagnosis Method for Grid- Tied Single-Phase Inverter

Open-Circuit Fault Diagnosis and Fault-Tolerant Control for a Grid-Connected NPC Inverter

Intelligent Condition Monitoring of Multiple Thermal Degradation of IGBT Modules Based on Case Temperature Matrix

Fault prediagnosis of power electronic devices in urban new energy system

An IGBT open-circuit fault detection method for modular multilevel converters

Open-Circuit Fault Diagnosis of NPC Inverter Based on Improved 1-D CNN Network

Analysis of High Di/Dt Current Pulses in Three-Level Npc Inverters Using Series Connected Igcts and Rc Snubbers