Abstract:Purpose Various iron loss models can be used for the simulation of electrical machines. In particular, the effect of rotating magnetic flux density at certain geometric locations in a machine is often neglected by conventional iron loss models. The purpose of this paper is to compare the adapted IEM loss model for rotational magnetization that is developed within the context of this work with other existing models in the framework of a finite element simulation of an exemplary induction machine. Design/methodology/approach In this paper, an adapted IEM loss model for rotational magnetization, developed within the context of the paper, is implemented in a finite element method simulation and used to calculate the iron losses of an exemplary induction machine. The resulting iron losses are compared with the iron losses simulated using three other already existing iron loss models that do not consider the effects of rotational flux densities. The used iron loss models are the modified Bertotti model, the IEM-5 parameter model and a dynamic core loss model. For the analysis, different operating points and different locations within the machine are examined, leading to the analysis of different shapes and amplitudes of the flux density curves. Findings The modified Bertotti model, the IEM-5 parameter model and the dynamic core loss model underestimate the hysteresis and excess losses in locations of rotational magnetizations and low-flux densities, while they overestimate the losses for rotational magnetization and high-flux densities. The error is reduced by the adapted IEM loss model for rotational magnetization. Furthermore, it is shown that the dynamic core loss model results in significant higher hysteresis losses for magnetizations with a high amount of harmonics. Originality/value The simulation results show that the adapted IEM loss model for rotational magnetization provides very similar results to existing iron loss models in the case of unidirectional magnetization. Furthermore, it is able to reproduce the effects of rotational flux densities on iron losses within a machine simulation.

Iron-Loss Modeling for Rotating Machines: Comparison Between Bertotti's Three-Term Expression and 3-D Eddy-Current Analysis

Iron Loss Model for Rotating Machines Using Direct Eddy Current Analysis in Electrical Steel Sheets

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

Prediction of iron loss in rotating machines with rotational loss included

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Iron Loss Separation in High Frequency Using Numerical Techniques

Simulation of iron losses in induction machines using an iron loss model for rotating magnetization loci in no electrical steel

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Iron Loss Model for Permanent-Magnet Synchronous Motors

Accuracy of iron loss calculation in electrical machines by using different iron loss models

Iron-Loss Model With Consideration of Minor Loops Applied to FE-Simulations of Electrical Machines

A General and Accurate Iron Loss Calculation Method Considering Harmonics Based on Loss Surface Hysteresis Model and Finite-Element Method

Investigation of Benchmark Model for Estimating Iron Loss in Rotating Machine

Modeling of iron losses of permanent-magnet synchronous motors

Calculation of Iron Loss in Electrical Generators Using Finite-Element Analysis

Comparison of Iron Loss Models for Electrical Machines With Different Frequency Domain and Time Domain Methods for Excess Loss Prediction

An Accurate Iron Core Loss Model in Equivalent Circuit of Induction Machines

Evaluation of Iron Loss Models in Electrical Machines