Abstract:Avoiding the ablation on the rail surface and obtaining large enough electromagnetic thrust to push the armature forward to high speed are two core contents of the electromagnetic launch technology. Reducing the ablation on the rail surface as much as possible can effectively extend the service life of the electromagnetic launcher (EML). The greater the electromagnetic thrust, the greater the initial velocity of the armature launched by the EML. The ablation on the rail is closely related to the temperature of the rail surface, and the electromagnetic thrust is proportional to the inductance gradient in the rails. The water flowing through cooling channels in rails can take away most of the heat generated by megaampere current flowing through the rails and armature in a few milliseconds. In this way, serious ablation on the rail can be avoided. Although the cooling channels are very helpful to reduce the ablation on rails, if the location distribution of the cooling channels in rails is not appropriate, the inductance gradient in the rails will be affected. This will affect the electromagnetic thrust in the EML. Therefore, the expressions of the inductance gradient in the rails with or without cooling channels are deduced and verified by the FEA in this article. The influence of the position distribution of the cooling channel on the inductance gradient in rails is analyzed. The results show that, with the increase of frequency, the influence of cooling channels on the inductance gradient in the rails diminishes gradually; if the distance between the cooling channels and the surface of the rails is greater than a certain value, the inductance gradient is no longer influenced by the cooling channels. At last, the relationship among ${L} ^{\prime} $ , ${L} _{\mathbf {1}}$ , and ${L} _{\mathbf {2}}$ are fit in this article. It can be used to find the rail parameters that meet both thermal management and electromagnetic driving force requirements.

Effect of Geometrical Parameters Change on Current Distribution in the Electromagnetic Launcher

Electromechanical Performance of Rails With Different Cross-Sectional Shapes in Railgun

The Dynamic Performance and Thermal Computation of Electromagnetic Rail Launcher Considering Parameters Variation

Dynamic Inductance Gradient Analysis of Series-Enhanced Four-Rail Electromagnetic Launcher

A Review of the Computational Investigation of Three-Dimensional Transient Magneto-Thermal Coupling Characteristics of Electromagnetic Railgun Armature and Rail in High-Speed Sliding Electrical Contact

Interior Ballistic Characteristics of Electromagnetic Rail Launcher Under Continuous Firing

Electromagnetic-Mechanical Characteristics Study of a High-Speed Electromagnetic Launcher

Dynamic Mechanical Properties in Electromagnetic Rail Launcher with Cooling Channels

Inductance Gradient in Electromagnetic Launcher under Channel Cooling Condition

Effect of driving current profile on acceleration efficiency of electromagnetic railgun

Finite Element Analysis of Current Density Distribution in the Sliding Contact Interface of Electromagnetic Railguns: A Literature Review

Thermal Analysis in Electromagnetic Launcher with Different Section Shape Rails

Time-Varying Inductance Gradient in Rails Based on Geometric Mean Distance

Coupled-field Analysis of the Eletromagnetic Rail-Gun Barrel

A Multi-Field Coupling Model for the Magnetic-Thermal-structural Analysis in the Electromagnetic Rail Launch

PPPS-2013: Multi-physics coupling field analysis of the electromagnetic rail-gun barrel

Evaluation of a Superconducting Augmented Rail-Type Electromagnetic Launch System

Characteristics of Current Distribution in Rails and Armature with Different Section Shape Rails

Finite Element-Boundary Element Method Based Simulations of Electromagnetic Railgun in Augmented Configurations

Analysis of parameter sensitivity of electromagnetic railgun system

Simulation of an Electromagnetic Launcher with a Superconducting Inductive Pulsed Power Supply