Abstract:Abstract How to adjust the temperature zone temperature and furnace speed parameters to optimize the furnace temperature curve, so as to improve the product quality is the main problem faced by the temperature curve optimization of the reflow furnace. In this paper, the heat transfer model is established by the heat convection and heat conduction equations, and the mechanism of temperature change in the welding area is analyzed. Then, by gradually determining the objective function and comprehensively establishing the optimization model according to the known conditions, the optimal parameters are solved, so as to solve the optimization problem of furnace temperature curve. According to Newton’s cooling law, specific heat theorem and Laplace equation, the temperature function of the center of the welding zone is deduced and solved, and the analytic function model of the temperature change in the center of the welding area can be obtained by synthesizing the inherent size conditions of the reflow furnace. Taking the corresponding data of experimental temperature and time as the fitting data, the undetermined parameters of the model were solved by nonlinear least square fitting method and undetermined coefficient method. The square sum of fitting residuals is 5857.7, which proves that the model has good fitting effect. Using the new experimental data to solve the model, the temperature change of the welding center at each position and time in the reflow furnace is analyzed. The temperature in the center of the welding area at the middle point of the low temperature zone 3, 6, 7 and the end of the small temperature zone 8 is 143.81°C, 181.78°C, 201.33°C, 228.97°C, respectively.

Soft-sensing Model for Copper Liquid Temperature of Heat Preservation Phase in Copper Refining Rotary Anode Furnace and Its Application

Soft-sensor Modeling for Liquid Copper Temperature of Scrap Copper Smelting in the Reduction Process

Study on Billet Temperature Prediction and Furnace Temperature Optimal Setting of Regenerative Reheating Furnace

On-line soft sensing for end point of naphtha based on neural network

Soft measurement of heating value of burning municipal solid waste forcirculating fluidized bed

Soft Sensor and Internal Model Control of Heating Furnace Thermal Efficiency

A Soft Sensing Prediction Model of Superheat Degree in the Aluminum Electrolysis Production

STUDY ON TEMPERATURE MEASUREMENT IN COPPER REFINING FURNACE

Study on Temperature Model and Self-Adaption for Finishing Stands of Hot Strip Mill

Study on Soft Sensoring of Electrolyte Compositon Based on Intelligent Computation

A Framework for Soft Sensing of Liquid Pool Length of Continuous Casting Round Blooms

Development of Soft-Sensor for Solvent Dehydration Tower

Soft-sensing Technology Implemented in Acetaldehyde Reaction Process

Study on Optimal Location Problem of Temperature Sensor in Copper Refining Furnace

Simulation and Control of Thermal Process in Bell-Type Annealing Furnace

Research on Soft-sensing of Boiler Outlet Flue Gas Temperature

Modeling and Analysis of Temperature Compensation for Multi-temperature Zone Sintering Furnace Temperature Sensing

Advanced Soft-Sensing Techniques for Predicting Furnace Temperature in Industrial Organic Waste Gasification

Numerical simulation for heat transfer behavior of copper slag ladle under air-cooling mechanism

PSO-FDM (Particle Swarm Optimization-Finite Difference Method)-Based Simulation Model of Temperature and Velocity of Full-Scale Continuous Annealing Furnace

Optimization Model Design for Temperature Curve of Reflow Furnace