Abstract:This paper presents a review of the efforts directed to the preparation of ultra-high-purity Nb published during the last 15 years. The interest in high-purity Nb has risen from the need for materials in high temperature and vacuum technology, superconductivity, solid state physics, and its potential in atomic energy fields. Depending on its many applications, the “purity” of Nb is understood in different ways. Based on results of known purification processes for Nb (e.g., liquid-liquid extraction of fluorides, distillation of halogenides, electrolysis in molten salts, electron beam float zone refining, electrotransport, and degassing in ultra high vacuum), an optimized method has been developed, consisting of electrolytic refining which results in single crystals, zone melting, and ultra high vacuum treatments. Material produced by the process has maximum impurity concentrations of 10−l ppm Ta, 2×10−3 ppm W, 4×10−6ppm Co, 2×10−3 ppm Fe, 10−5 ppm Cr, etc., with less than 1 ppm interstitials (C,N,O, except H) and a residual electrical resistivity ratio (RRR) of >104. To accurately determine residual impurity levels, improved analytical techniques were developed. Doping of the produced Nb with selected metallic (Cr,Mo,Hf,Ir) and nonmetallic elements (C, 0) on the ppm level served as both a calibration of the analytical techniques and an effort to tailor the physical properties. General aspects for the development of purification processes for refractory metals, sources of contamination during purification, sample preparation, and application of Nb, as well as the limiting bulk and surface purity of reactive metals are presented here.

Niobium and Other High Temperature Refractory Metals for Aerospace Applications

Processing, Properties and Applications of High-Temperature Niobium Alloys

HANDBOOK ON THE PROPERTIES OF NIOBIUM, MOLYBDENUM, TANTALUM, TUNGSTEN AND SOME OF THEIR ALLOYS (MANUEL SUR LES PROPRIETES DU NIOBIUM, MOLYBDENE, TANTALE, TUNGSTENE ET LEURS ALLIAGES)

Oxidation Resistant Nickel Aluminide Coating on Niobium Alloy C103 for High Temperature Aerospace Applications

Technological Challenges in Extractive Metallurgy and Refining of Nb, Ta and Preparation of their Compounds & Alloys

Effect of different thermomechanical processing on structure and mechanical properties of electron beam melted niobium

Metallurgical and Technological Request for High Purity Niobium in SRF Application

Preparation and Characterization of Nb-1Zr-0.1C Alloy Suitable for Liquid Metal Coolant Channels of High Temperature Reactors

Purification of Niobium by Electron Beam Melting

A Nitride-Reinforced NbMoTaWHfN Refractory High-Entropy Alloy with Potential Ultra-High-Temperature Engineering Applications

Preparation and Characterization of Ultra-High-Purity Niobium

Aluminothermic preparation of Hf–Ta and Nb–10Hf–1Ti alloys and their characterization

Application of Nb-W Alloys in Liquid Rocket Engine

Electron Beam Melting of Niobium Alloys from Blended Powders

Investigating the Replacement of Nickel-based Superalloys with Niobium-Based Superalloys in the New Generation of Turbine Blades in the Aero-space Industry

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

Refractory High-Entropy Alloy Coatings for High-Temperature Aerospace and Energy Applications

Niobium and tantalum: State of the world market, fields of application, and raw sources. Part I

The Protection, Challenge, and Prospect of Anti-Oxidation Coating on the Surface of Niobium Alloy

Refractory high-entropy nanoalloys with exceptional high-temperature stability and enhanced sinterability

Niobium-Based Alloy Design for Structural Applications: Processing-Structure-Property Paradigm