Electrosprayed Robust Graphene Layer Constructing Ultrastable Electrode Interface for High-Voltage Lithium-Ion Batteries
Guoqiang Zhang,Kui Lin,Xianying Qin,Lihan Zhang,Tong Li,Fengzheng Lv,Yue Xia,Wenjie Han,Feiyu Kang,Baohua Li
DOI: https://doi.org/10.1021/acsami.0c06698
2020-07-29
Abstract:Aluminum (Al) foil serving as the most widely used cathode current collector for lithium-ion batteries (LIBs) is still not flawless to fulfill the increasing demand of rechargeable energy storage systems. The limited contact area and weak adhesion to cathode material as well as local corrosion during long-term operations could deteriorate the performance of LIBs with a higher working voltage. Herein, a reduced graphene oxide (RGO)-modified Al foil (RGO/Al) is developed via electrospraying to increase interfacial adhesion and inhibit anodic corrosion as a functional current collector. Valid corrosion resistance to electrolyte and strengthened adhesion of electrode particles to current collectors are beneficial to improve the interfacial reaction dynamics. The RGO/Al-based LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> cells (LNMO-RGO/Al) exhibit better electrochemical performances in terms of long-term cycling discharge capacity retention (90% after 840 cycles at 1 C), rate capability (101.8 mAh g<sup>–1</sup> at 5 C), and interfacial resistance, prominently superior to bare Al-based cells (LNMO-Al). This work not only contributes to long-term stable operation of high-voltage LIBs but also brings new opportunities for the development of next-generation 5 V LIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c06698?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c06698</a>.Digital photograph of large-scale electrosprayed GO/Al, dark field cross-sectional TEM image and corresponding EDS mapping of RGO/Al, 2D and 3D AFM images of RGO/Al and bare Al, atomic concentration of C, O, and Al elements as a function of sputter time, exploration of the optimal technological parameter of Al anti-corrosion property, SEM images of corrosion circumstance on bare Al and RGO/Al, EIS spectra and fitted value of Nyquist plots of as-prepared LNMO-Al and LNMO-Al/RGO cells, charge–discharge profiles of LNMO-Al and LNMO- RGO/Al cells at a high current density, and SEM image of bare Al and RGO/Al after long cycle and corresponding EDS mapping (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c06698/suppl_file/am0c06698_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology