Abstract:The central diaphragm is often used to reduce the span to maintain the stability and safety of structure in the construction of large-span loess tunnel due to the structure complexities. In this paper, relying on the field monitoring and measurement for Wangcun tunnel in Huangling-Yan’an expressway expansion project, the crown settlement and horizontal convergence of primary support steel rib and central diaphragm steel rib during the construction are analyzed by the upper bench CD method. According to the internal force transfer, deformation coordination, and arch foot displacement between the two structures, the support system is regarded as the arch-beam fixed structure with three times of statically indeterminate and movable abutment under the loads, and the mechanical calculation model of sidewall steel rib and the central diaphragm structure bearing loads and deformation together is established. Finally, through the mechanical model mentioned above, the deformation characteristics of central diaphragm structure and the horizontal convergence in the upper bench of tunnel are calculated and analyzed. The research shows the following: (1) the accumulated settlement of sidewall steel rib in Part I is greater than that of the sidewall steel rib in Part II, and the accumulated settlement of each part at the support structure during the tunnel excavation is less than the reserved deformation of 150 mm specified in the tunnel excavation; (2) the settlement located at the waist and maximum excavation line position of central diaphragm is mainly affected by the excavation of Parts I and II in upper bench; (3) during the whole excavation process, the excavation of Part I and Part II has the greatest influence on the convergence at arch waist and the maximum excavation line position in Part I, and the convergence at the above two positions all experienced four stages of “convergence-expansion-convergence-gradual stability”; and (4) the errors between the horizontal convergence and the deformation of central diaphragm obtained by the mechanical model and the field monitoring data are between 12.7% and 27.5%. The calculated results are in good agreement with the actual situation. The research can provide a theoretical basis for the study of deformation and mechanical properties for support structure in the construction of large-span loess tunnel by the upper bench CD method.

MECHANICAL CHARACTERISTICS OF DOMESOF LARGE SURGE TANK AT TAILRACE DURING CONSTRUCTION

IMPROVED EMPIRICAL FORMULATION FOR SEABED TRENCH PROFILE AT TOUCHDOWN ZONE AND ITS EFFECTS ON FATIGUE OF STEEL CATENARY RISERS

A case study of the failure mechanism analysis and support design of a tailrace tunnel in a weak fracture zone containing expansive minerals

MECHANICAL CHARACTERISTICS OF IRON MINE TAILING MATERIALS AND ANALYSIS ON DEFORMATION AND STABILITY OF TAILING DAM

Stability Investigation and Stabilization of a Heavily Fractured and Loosened Rock Slope During Construction of a Strategic Hydropower Station in China

Study of Deformation Behaviors and Mechanical Properties of Central Diaphragm in a Large-Span Loess Tunnel by the Upper Bench CD Method

DISPLACEMENT ANALYSIS OF GEOMEMBRANE BAG WITH SAND SOIL COFFERDAM IN ZHOUSHAN UNDERSEA IMMERSED TUBE TUNNEL

Monitoring Analysis of the Underground Cavities in Pubugou Hydropower Station during the Construction Period

Seepage and Deformation Analysis of Tailing Dam regarding the Upper Reservoir of Tiantai Pumped Storage Station

Stability Study on Excavation and Lining Structure of Guandi Tailrace Bifurcation Tunnel

Physical and Mechanical Characteristics of Soft Rock Tunnel and the Effect of Excavation on Supporting Structure

An Analysis of Two Case Studies on the Construction of Underground Caverns-A Focus on the Tiantai Pumped Storage Station

Deformation and Reinforcement Monitoring Analysis of Tail Water Outlet Slope in a Hydropower Station

Stability of large underground caverns excavated in layered rock masses with steep dip angles: a case study

Numerical Modeling on Key Construction Schemes of Large-scale Surge Tank under Complex Geological Conditions

Mechanical Characteristics of Tailings in Different Depositional Zones: A Case Study of Caijiagou Tailings Pond in Shaanxi, China

Coordinated deformation control technologies for the high sidewall—bottom transfixion zone of large underground hydro-powerhouses

Comprehensive analysis of the surrounding rock mass stability in the underground caverns of Jinping I hydropower station in Southwest China

Long-term Stability Analysis of the Left Bank Abutment Slope at Jinping I Hydropower Station

Deformation Monitoring Of Geomechanical Model Test And Its Application In Overall Stability Analysis Of A High Arch Dam

Optimization design of a large-scale seepage control system at a high arch dam site