Abstract:This study characterized and modeled heterogeneous surface wettability in sandstone and investigated the role of spatial heterogeneity and correlation length of surface wettability on relative permeability in a supercritical CO2 (scCO(2))-brine-rock system. Understanding the role of wettability heterogeneity on relative permeability is essential to geological CO2 sequestration, oil and gas recovery, and contaminated groundwater remediation. Although numerous studies have attempted to understand the influences of surface wettability, capillary number (Ca), and viscosity ratio, the role of the spatial variation and correlation length of surface wettability on two-phase flow in three-dimensional (3D) porous media has not been unraveled due to the challenges in the measurement and representation of realistic rock surface wettability. In this work, we conducted in-situ measurements of surface contact angle (CA) in a Bentheimer sandstone after CO2 flooding using micro-computed tomography (micro-CT), and found that the pore-scale CA distribution on rock surfaces followed a log-normal distribution associated with a spatial correlation length. Based on the statistical information from CT scanning, a Gaussian random field was used to model CA distributions that had desired standard deviations and spatial correlation lengths, which were then adjusted within a certain range of values for sensitivity analyses to study their combined effects on the two-phase flow in the porous medium using the lattice Boltzmann (LB) method. The LB two-phase flow simulation was accelerated using hybrid, multicore parallel computing to overcome the challenges in simulating multiphase flow in a large 3D domain having 800 x 800 x 600 nodes. The simulation results showed that the surface wettability heterogeneity (i.e., standard deviation of CA) had a lesser effect on the relative permeability of the wetting fluid (water) but a more significant impact on the relative permeability of the non-wetting fluid (scCO(2)). The Corey model was used to fit the LB-simulated relative permeability curves of water and scCO(2) and showed that the variations in the relative permeability curves for both water and scCO(2) increased as the standard deviation and spatial correlation length of CA increased. This study illustrated that the assumption of homogeneous surface wettability may cause errors in multiphase flow simulations. The impacts of both the standard deviation and spatial correlation length of CAs should be accounted for. This is the first study that explored the spatial correlation lengths associated with CA distributions on sandstone surfaces and comprehensively investigated the roles of both spatial variation and correlation length of CA on two-phase flow properties in 3D porous media. The optimized LB multiphase flow model was proved a powerful tool to study the interplays and combined effects of these statistical parameters, which had critical applications in numerous natural and engineering processes that involved multiphase flow in porous media.

Study of seepage parameters measured in water pressure test inside boreholes in cut-off wall

Analytical Study of Seepage Flow into A Lined Tunnel in A Semi-Infinite Aquifer

A Semi-Theoretical Method for Determining the Anisotropic Permeability Based on Average Permeability of Rock Masses

Standard exploration of permeability coefficient test for clay by HCA

Analytical Solutions of Steady a Seepage Field for Deep-Buried Tunnel with Grouting Ring Considering Anisotropic Flow

Permeability coefficient of waterproof curtain by borehole packer test

Calculation of seepage flow of earth rock dam for hanging micro porous cut-off wall

Research on flow field characteristics in the karst tunnel face drilling hole (conduit) under the coupling between turbulence and seepage

The Role of the Spatial Heterogeneity and Correlation Length of Surface Wettability on Two-Phase Flow in a CO2-water-rock System

Effects of Confining Pressure on Permeability in a Single Fracture Based on the Deformation of Hydraulic Aperture at Low Fluid Velocities

A New Approach to Permeability Inversion of Fractured Rock Masses and Its Engineering Application

The Influence of the Vertical Cut-off Wall's Place and Depth to Seepage of the Earth-Rolk Dam

PERMEABILITY MEASURING OF LARGE SCALED SINGLE FRACTURED MEDIA WITH A SEEPAGE-STRESS COUPLING TESTING APPARATUS

Determining representative permeability coefficients of original and grouted rock mass for underground water-sealed oil storage: method and application

EXPERIMENTAL STUDY ON COEFFICIENT OF SENSITIVENESS BETWEEN PERCOLATION RATE AND EFFECTIVE PRESSURE FOR LOW PERMEABILITY ROCK

Hydraulic Conductivity of Rock Masses Surrounding Water Curtain Boreholes for Underground Oil Storage Caverns

Method for permeability measuring of large scaled single fractured medium with the seepage-stress coupling test

Experimental Study of the Laws Between the Effective Confirming Pressure and Rock Permeability

Variations in Hydraulic Properties of Sendimentary Rocks Induced by Fluid Injection: the Effect of Water Pressure

The mechanism of seepage responding characteristic for the water curtain borehole injection in underground water-sealed oil storage

Seepage stability analysis of a deep-buried tunnel in fractured rocks based on a non-Darcy hydro-mechanical coupled method