Development of a differential mid-infrared carbon monoxide detection device

Sui Yue,Dong Ming,Zheng Chuantao,Wang Yiding
DOI: https://doi.org/10.19650/j.cnki.cjsi.2016.10.015
2016-01-01
Abstract:According to the absorption characteristic of carbon monoxide molecular in mid-infrared waveband,a dual-channel (i.e. detection signal channel and reference channel)differential carbon monoxide (CO)detection device is developed using an infrared thermal radiation light source (IR55)and dual-channel pyroelectric detector (LM244).A dual-channel lock-in amplifier is used to process the two output signals of the dual-channel detector,the system noise is restrained effectively and the detection precision of the instrument is enhanced.The detection principle of the system is introduced,the implementation scheme of the optical system and the dual-channel lock-in amplifier is given.The amplitude of the minimum standard signal that the dual-channel lock-in amplifier can extract is 1 mV,and the phase-shift error is below 0.2%.Using the prepared CO samples with the volume fraction of 0 ~1 ×1 0-3 ,the gas detection experiments were carried out to test the device performance.Experiment results show that the low detection limit of the system is about 1 ×1 0-5 ,and the relative measurement error is less than 1 5%.The concentration variation range is -5.2 ×1 0 -6 ~6.2 ×1 0 -6 when the gas volume fraction is 0 ×1 0 -6 .Considering the gas diffusion time in the gas-cell during static gas preparation,the response time of the instrument is about 58 ~62 s.Compared with the CO detection instruments utilizing quantum cascaded lasers and distributed feedback lasers,the developed instrument has the advantages of simple optical-path structure,high performance-cost ratio and etc.,and has broad application prospects in CO detection under the circumstances of coal-mine,environment protection and etc.
What problem does this paper attempt to address?