Abstract:Multi-level dual-active-bridge (DAB) DC-DC converters offer higher voltage-blocking capability and larger stepup ratios, as well as increased number of degrees of freedom (DoFs) compared to the traditional two-level DAB converter. Thus, it has potential to be used in medium-voltage DC (MVDC) systems. However, the control complexity of the multi-level DAB converters also increases along with the number of DoFs. When soft-switching is considered as an optimization objective together with other performance indices (e.g., peak or root-mean-square values of the inductor current), the analytical solutions will be difficult to derive due to the increased number of control variables and complicated soft-switching constraints. To address this issue and improve the efficiency of the DAB converter, this paper proposes a control strategy for a multi-level DAB converter to achieve both soft-switching and minimum current stress simultaneously. The analytical solutions are calculated by improved Karush-Kuhn-Tucker (KKT) conditions, where the numerical solutions are used to locate the operating modes and determine the zero-voltage-switching (ZVS) boundaries. This can simplify the Lagrangian function and inequality constraints, and then, the analytical solutions can be obtained by the simplified KKT conditions. In addition, a comprehensive comparison between the quasi-ZVS and strict-ZVS control is carried out, so that the converter efficiency, implementation complexity, and smooth transition between different power levels can be compromised for practical applications. Finally, the performances of the proposed control strategy in terms of current stress minimization and softswitching operation are validated by experimental tests.

Dynamic Modeling and Minimum Backflow Power Controlling of the Bi-Directional Full-Bridge DC-DC Converters Based on Dual-Phase-Shifting Control

Minimum Current Control for Under-Resonant Dual-Bridge-Series-Resonant Converter

Study on dual active bridge DC-DC converter based on second dual-phase-shifting control

A Novel Soft-Switching and Low-Conduction-loss Bidirectional DC-DC Converter

Modulation of 2/3-Level Dual-Active-Bridge DC-DC Converters for Soft-Switching and Minimum Current Stress.

Bi-directional Full-bridge DC-DC Converters with Dual-phase-shifting Control and Its Backflow Power Characteristic Analysis

Dynamic Modeling for a Bi-directional DC/DC Converter with Two Regulative Parameters

Optimal Control of Multi-Level DAB Converters for Soft-Switching and Minimum Current Stress

ZVS Control Strategy of Dual Active Bridge DC/DC Converter with Triple-Phase-shift Modulation Considering RMS Current Optimization

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

Modeling and Analysis of 2/3-Level Dual-Active-Bridge DC-DC Converters with the Five-Level Control Scheme

An Analysis of the Power Characteristics of Bidirectional Full-Bridge DC-DC Converter Under Triple-Phase-Shift Control

Research of single phase-shift close-loop control for bi-directional full-bridge DC-DC converter

New methods to reduce circulating energy in dual active bridge converter

A Soft-Switching Full-Bridge Inverter with High Efficiency

Research on Soft-switching Control Strategies for Half-bridge Converters

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

DC Bias Elimination and Soft Switching in Transient State of Dual-Active-Bridge DC-DC Converter.

Research on control technology of dual active full bridge DC-DC converter

Large Power Hybrid Soft Switching Mode PWM Full Bridge DC–DC Converter with Minimized Turn-on and Turn-off Switching Loss

Backflow Power Optimization Control for Dual Active Bridge DC-DC Converters