Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Modeling and Analysis of Unbalanced Moment for an Axial-Flux in-Wheel Motor with Eccentricity

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Unbalanced Magnetic Force Prediction in Permanent Magnet Machines with Rotor Eccentricity by Improved Superposition Method

Electromagnetic performance of interior permanent magnet machines with eccentricity

Unbalanced Magnetic Force In Permanent Magnet Machines Having Asymmetric Windings And Static/Rotating Eccentricities

Vibration characteristics analysis of a rotor for a permanent magnet motor with Air-Gap Eccentricity

Analytical Modeling Of Axial Flux Pm Machines With Eccentricities

Sensitivity Analysis and Optimization of Electromagnetic Force Wave of an Axial-Flux in-Wheel Motor

Analytical Modeling of the Electromagnetic Vibration and Noise for an External-Rotor Axial-Flux In-Wheel Motor.

Analytical Modeling Of Static Eccentricities In Axial Flux Permanent-Magnet Machines With Concentrated Windings

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

An Improved Conformal Mapping Method for Static Angular Eccentricity Analysis of Axial Flux Permanent Magnet Machines

Analytical Calculation of Electromagnetic Performance in Dual-winding Bearingless Flux-Switching Permanent Magnet Machines Considering Rotor Eccentricity

Influence of Pole and Slot Combinations on Vibration and Noise in External Rotor Axial Flux In-Wheel Motors

Analytical Modeling of Misalignment in Axial Flux Permanent Magnet Machine

Quasi-3-D Nonlinear Analytical Modeling of Magnetic Field in Axial-Flux Switched Reluctance Motors

Magnetic Field Calculation in Axial Flux Permanent Magnet Motor With Rotor Eccentricity

Analytical Modeling of High-Torque-Density Spoke-Type Permanent Magnet In-Wheel Motor Accounting for Rotor Slot and Eccentric Magnetic Pole

Longitudinal Vibration Analysis and Suppression of Electric Wheel System Driven by In-Wheel Motor Considering Unbalanced Magnetic Pull

Modeling Analysis and Experimental Study of Electromagnetic Excitation Forces in an Induction Motor with Static Eccentricity